45 RPM 24 Volt DC Gearmotor w/Drive Wheel

Item Number: 5-1660

Price: $9.95
TOP
Back to top

45 RPM 24 Volt DC Gearmotor w/Drive Wheel

45 RPM 24 Volt DC Gearmotor w/Drive Wheel

item number: 5-1660 PRICE: $9.95 2066 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 5-1660
45 RPM 24 Volt DC Gearmotor w/Drive Wheel
Item Number: 5-1660
Price: $9.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 163 of our current catalog
Description
45 RPM 24 VDC INLINE GEARMOTOR
New, Molon model CHM-2435-1. High torque output. 4-7/8" wheel with o-ring on edge to friction drive equipment. Use for drive wheel on robots. Operates at 1/2 speed on 12 VDC. Permanent magnet motor.

SPECIFICATIONS
  • Speed 45 RPM
  • Voltage 24 DC
  • Amperage 0.28 Amps
  • Torque 7.5 in-lbs.
  • Rotation Reversible
  • Duty Continuous
  • Mount 4 tapped holes 2-3/8" x 2-1/2"
  • Shaft 5/16" dia.
  • Size 2-3/4" x 2-1/4" x 3"
  • Shpg. 1-1/2 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 4

What material is the wheel made from?

A: The wheel is a hard plastic, the specific material is unknown.

what power supply would you recommend?

A: While we don't have any 24VDC power supplies, this motor will run on 12 VDC. Any power supply 650 mA or higher would be adequate.

I am looking to drive a 16' Diameter platform made out of 2 layers of 3/4" plywood. Would this motor be able to handle that load?

A: No. This motor would not handle anywhere close to that load.

I want to use this to operate a Santa Claus going up and down a chimney.. ideally I would like this to operate on a continuous basis and automatically go up and down.. how must this be setup to know when to reverse direction automatically?

A: You could use some microswitches to reverse the direction. Or have a reciprocating type movement from the motor.

Recently Viewed
There are no recently viewed products.
Email a Friend
45 RPM 24 Volt DC Gearmotor w/Drive Wheel
Item Number: 5-1660
Price: $9.95
Message for your friend:

I found this on the Surplus Center website, http://www.surpluscenter.com. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

45 RPM 24 Volt DC Gearmotor w/Drive Wheel
Additional Comments:

Please wait...