10000 PSI Power Team PA6 Air Driven Hydraulic Pump

Item Number: 9-8000

Price: $399.95
TOP
Back to top

10000 PSI Power Team PA6 Air Driven Hydraulic Pump

10000 PSI Power Team PA6 Air Driven Hydraulic Pump

item number: 9-8000 PRICE: $399.95 96 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 9-8000
10000 PSI Power Team PA6 Air Driven Hydraulic Pump
Item Number: 9-8000
Price: $399.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 38 of our current catalog
Description
10000 PSI AIR DRIVEN HYDRAULIC PUMP
Brand new, POWER TEAM PA6, Model F air driven hydraulic pump designed to operate single acting cylinders. Compact, lightweight and portable for powering all types of hydraulic equipment. Internal relief valve.

SPECIFICATIONS
  • Air Requirement 40-100 PSI
  • Air Consumption 20 CFM
  • Hydraulic Pressure 10000 PSI
  • Flow:
      78 cu. in./min at 500 PSI
      29 cu. in./min at 5000 PS
      10 cu. in./min at 10000 PSI
  • Operation Hand/Foot
  • Reservoir Size 105 cubic inches
  • Sound Level 85 dBA at 10000 PSI
  • Air Inlet Port 1/4" NPT
  • Hyd. Oulet Port 3/8" NPT
  • Size 9-1/2" x 5" x 7-3/4"
  • Shpg. 18 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 8

For motorcycle lift. I have a 6hp craftsman 30 Gal tank don't know the CFM. without looking it up ,somewere between 10&15 CFM. Do you think this would work.Thanks Jeff

A: As long as the input pressure range is correct, the unit will function. The speed at which it flows will be directly affected by the volume. 20 cfm is the upper requirement, but has been shown to work at less.

Can the oil capacity of this pump be increased enough to run two 6" X 18" cylinders?

A: Additional capacity could be plumbed to feed the existing reservoir, however; at the stated flow available at 500 psi, the total extension speed time would be approximately 13 minutes for two 6x18 cylinders and longer times would apply for higher pressures.

Me puede regalar un página donde pueda ver más información de la bomba y el después donde la puedo encontrar en Colombia

A: http://www.spxflow.com/es/power-team/pd-pa6-neumatica-1-velocidad/

I would like to know if this comes with the hose to attach to the power team 10000 psi actuator. 14 inch stroke.

A: No hose is supplied.

How can I regulate pressure so that I won't over pressure my system? Is there an inline device I can add, like a regulator? Thanks

A: There are inline relief valves to protect components from overpressure, but with a high pressure pump as this the relief needs to be able to handle the full system pressure.

Can I use this pump with a 10 cfm air supply or would it be better to go with the hand pump since I can't supply the 20 cfm required ?

A: This pump can be used with a lower flow air supply, but will work at a slower speed.

Does this product have an adjustable releif valve to control psi

A: It does have an internal relief valve, designed mostly to protect from over pressurization. Has to be taken apart to adjust.

I am building a shop press with a 6" x 10", 2 way ram rated for 3000psi. Can this unit be used to operate a double acting cylinder if a 4 way valve is used?

A: Yes, it could be used with an external valve. Also make sure to keep oil pressure within the rating of you cylinder.

Recently Viewed
There are no recently viewed products.
Email a Friend
10000 PSI Power Team PA6 Air Driven Hydraulic Pump
Item Number: 9-8000
Price: $399.95
Message for your friend:

I found this on the Surplus Center website, http://www.surpluscenter.com. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

10000 PSI Power Team PA6 Air Driven Hydraulic Pump
Additional Comments:

Please wait...