Hello, will I have wanted to know if you would have a hydraulic engine " Fenner power MF 4114 and one Fenner stone Start solenoid EF 1070.combien for a delivery in France? thank you
A: We do not carry either of those items specifically. This item appears to be similar to the motor requested, and we have start solenoids that will operate it. Please contact our Product Support department for additional assistance, or our Customer Service department to build an international quote.
Date Submitted: 03/04/2017
my motor looks the same except it has two contacts to attach wires to one positive then the other has a wire from it to one side of the selenoid will the single pole work
A: While it may work, it would be best to ask an mechanic/electrician knowledgeable in mobile hydraulic systems.
Date Submitted: 12/29/2016
Will this motor interchange with maxim wx-1787-6 on hydraulic power unit for hay spike?
A: We don't have any interchange information for this motor crossing to other manufacturers.
Date Submitted: 05/23/2016
What is the RPM's of this Motor?
A: The speed will vary with the load. When used on hydraulic power packs the flow rating is usually stated with the motor turning about 2500 RPM.
Date Submitted: 02/23/2015
is there a 6 volt motor I can use in place of this 12 volt motor?
A: Sorry we don't have any other voltages.
Date Submitted: 01/21/2015
what horse power rating does the KMD3 12 volt dc spx motor have?
A: Calculating for full load draw of 270 amps and 12 volts makes it about 4.3 HP max.