1" PA205-16 Pillow Block Bearing

Item Number: 1-205-16-PA-S

Price: $6.95
TOP
Back to top

1" PA205-16 Pillow Block Bearing

1" PA205-16 Pillow Block Bearing

item number: 1-205-16-PA-S PRICE: $6.95 17955 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 1-205-16-PA-S
1" PA205-16 Pillow Block Bearing
Item Number: 1-205-16-PA-S
Price: $6.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 2 of our current catalog
Description
PILLOW BLOCK BEARING
New 200 series pillow block bearing. Cast iron construction with self-aligning ball bearing insert and grease zerk. Two set screws on the inner race to lock shaft.

SPECIFICATIONS
  • Bore 1"
  • Bore Thru-Length 1.339"
  • Center-Line Height 1.437"
  • Bearing # UC205-16
  • Housing # PA205
  • Mount 2.20"  bolt center
  • Bolt Size 3/8-16 drilled/tapped
  • Overall Height 2.875"
  • Shpg. 3 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 3

What is the max rpm on these? Thanks, Eric

A: The manufacturer does not publish load ratings past 5000 rpm for these bearings.

Hi, What does the bottom of this item look like are there 2 bolts or 4 bolts that hold the pillow block? Thank you! Best regards, Paul

A: These mount on two 3/8"-16 holes on 2.21" centers. The overall width of the base is 3.315", and the overall depth is 1.767".

How do you bolt these down? Can you post a picture of the bottom? Thanks

A: These mount on two 3/8"-16 holes on 2.21" centers. The overall width of the base is 3.315", and the overall depth is 1.767".

Recently Viewed
There are no recently viewed products.
Email a Friend
1" PA205-16 Pillow Block Bearing
Item Number: 1-205-16-PA-S
Price: $6.95
Message for your friend:

I found this on the Surplus Center website, http://www.surpluscenter.com. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1" PA205-16 Pillow Block Bearing
Additional Comments:

Please wait...