1.5" Bearing w/0.75" Shaft

Item Number: 1-4156

Price: $5.99
Back to top

1.5" Bearing w/0.75" Shaft

1.5" Bearing w/0.75" Shaft

item number: 1-4156 PRICE: $5.99 92 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 1-4156
1.5" Bearing w/0.75" Shaft
Item Number: 1-4156
Price: $5.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 137 of our current catalog
New wide ball bearing with steel shaft. Originally for fan/water pump. Part #8523526

  • Bearing 1-1/2" dia. x 2-1/8" wide
  • Shaft 3/4" dia.
  • Shaft end 1 2-1/8" long w/3/16" keyway
  • Shaft end 2 1" long, machined to 0.626" for last 5/8"
  • Overall length 5-1/4"
  • Shpg. 2 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 5

Is the bearing sealed/shielded at both ends? no way to lube? thanks

A: Correct, it is a sealed annular bearing.

do you have a total length of the product

A: As stated in the specifications, the overall length is 5-1/4".

Is there one or two ball bearings in the housing of this product?

A: This product uses an annular ball bearing that supports the entire length.

What is the maximum rpm for bearing ?

A: We have no data regarding the maximum rpm rating for this bearing.

Can the short end be welded to something or is the metal so hard it would shatter when put under strain. Also can the short be milled for a keyway. Tony

A: We don't have any information concerning what the actual steel compound is on the shaft. The shaft could be pressed off the bearing for machine work.

Recently Viewed
There are no recently viewed products.
Email a Friend
1.5" Bearing w/0.75" Shaft
Item Number: 1-4156
Price: $5.99
Message for your friend:

I found this on the Surplus Center website, http://www.surpluscenter.com. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.5" Bearing w/0.75" Shaft
Additional Comments:

Please wait...