Missing Parts: The fan on the rear of the motor is missing.
2.8 HP TREADMILL MOTOR Icon Health and Fitness model# F-286340 permanent magnet motor with brushes. Built for use in treadmills, ideal for use with speed controller. Would also make an excellent DC generator. Rated for 2.8 HP treadmill duty or 2.8 HP (2089 W) continuous duty. Internal, normally closed bimetallic switch signals thermal overload.
Motor housing diameter measures 115mm (4.527"). Removable, heavy (8.75 lb.) steel flywheel mounted onto motor shaft by means of keyway and retention screw. Flywheel measures 169mm (6.654") dia. x 40mm thick. Flywheel has 38mm O.D. ten-groove pulley for serpentine belt. Requires external source of air-flow over motor for prolonged use.
Power 2.8 HP (2089 W)
Voltage 130 VDC
Amperage 16.1 Amps
RPM 4135 RPM @ 130 VDC, No Load
Mount Two 7mm Holes in Housing on 3" Centers
Shaft 17mm dia. x 43.5mm overall length, Stepped down to 14mm dia. with 5mm keyway, End tapped 10-32
Would this motor drive a plastic shredder with speed reduction to 80 rpm
A: As long as the physical, electrical, and thermal limitations of the motor are considered and proper steps are taken to allow for the necessities of each, this motor could be usable in a number of applications.