SINGLE SPOOL 18 GPM OC CONTROL VALVE W/ FLOW CONTROL
Brand new, BRAND HYDRAULICS model SDCF755M184LF1 directional control valve with flow
control. Combines a 4-way directional control valve with a full range,
pressure-compensated, by-pass type flow control valve, and an adjustable
pilot-operated relief valve. Extremely fine flow metering to the work ports in direct
proportion to the handle movement. Cast iron body with Buna-N O-rings. Handle
Flow 18 GPM max.
Pressure 3000 PSI max.
Relief Valve Adj. set at 1500 PSI
Reqd. Filtration 30 micron
In/Out Ports 3/4" NPT
Work Ports 1/2" NPT
Mount 3 bolts on 2-5/16" x 3-11/16" x 3-15/16" centers
Will this operate a reversibly hydraulic motor similar to a Gresen 400?
A: This valve will operate a reversible hydraulic motor within the flow and pressure limitations of the valve.
Date Submitted: 05/10/2018
can I hook theses valves together and run 2 motors on a little skid steer ..in the first one then out and in the second then back to tank thanks or can you recommend a another valve I'm trying to understand these valves for starting off slow then flowing to full capacity hooked to handles pump is 16 gpm
A: No, you should not string these valves together in that fashion. If you split the flow through a 50/50 divider, that would allow you to operate two valves off the same pump flow.
Date Submitted: 03/31/2018
can four of these valves be run in series to run four motors at different variable speeds ?
A: No. These valves are not Power-Beyond capable to run in series.
Date Submitted: 09/21/2017
can this valve be adjusted while working? if so..can it be adjusted with your hand? also is this valve spring centered or no?
A: This valve has a friction detent so the lever will stay wherever you move it. It can be changed at any time to vary the speed of a motor. It is not spring centered.