1" NPT FIP Brass 600 PSI Ball Valve

Item Number: 20-1652-100

Price: $7.99
Back to top

1" NPT FIP Brass 600 PSI Ball Valve

1" NPT FIP Brass 600 PSI Ball Valve

item number: 20-1652-100 PRICE: $7.99 189 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 20-1652-100
1" NPT FIP Brass 600 PSI Ball Valve
Item Number: 20-1652-100
Price: $7.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 115 of our current catalog
New, CHAMPION-ARROWHEAD lead-free brass ball valve. Valves meet NSF61-9 regulations and California's AB-1953 regulations. Full port. FIP (Female Iron Pipe) ports comply with ANSI BI.20.1, rated for temperature range -20°F to 300°F.

  • Model Number BV100FPT600LF
  • Valve Type Ball
  • Ports 1" NPT FIP
  • Pressure (PSI) Max 600
  • Length W/O Handle 2-15/16"
  • Width W/O Handle 1-27/32"
  • Height W/O Handle 2-7/8"
  • Length W/ Handle 6"
  • Width W/ Handle 1-27/32"
  • Height W/ Handle 3-5/8"
  • Shpg lbs. 1.2
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 3

Will this work with NG? Thank You

A: We have not been able to confirm the materials used and cannot state that it will, no.

Will this work in hydraulic oil?

A: The valve is marked 600 CWP (Cold Working Pressure) and 150 SWP (Steam Working Pressure). The ball appears to be stainless steel, while the seat appears to be Teflon. If those are the materials used, if would work with low pressure hydraulic oil -at temperatures of 100 Fahrenheit or below- to 600 psi. At higher temperatures the safe pressure rating would decrease.

Will this valve work for diesel fuel or gasoline?

A: We don't have information regarding what sealing material this valve uses, so we cannot say that it will or will not work for volatile fuels.

Recently Viewed
Email a Friend
1" NPT FIP Brass 600 PSI Ball Valve
Item Number: 20-1652-100
Price: $7.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1" NPT FIP Brass 600 PSI Ball Valve
Additional Comments:

Please wait...
Newsletter SignUp