17.9 cu in CHAR-LYNN 101-1007 HYD MOTOR Brand new CHAR-LYNN H series motors. Gerotor power element. Interchangeable with the following motor lines: Dynamic BMPH, Danfoss DH, White RS, Parker/Ross MG/TB.
What is the Horse Power equivalent of this motor tied into a hydraulic 27GPM pump on a 13 tooth 7/8" spline? Thanks Charles
A: This motor will develop approximately 9.47 HP when operated at the continuous ratings of 15 GPM and 1350 PSI. Operation outside these continuous ratings will result in motor failure, the length of survival time being proportional to the extremity of the the overwork.
Date Submitted: 12/02/2016
Can I power this with an 11 gallon a minute log splitter pump to power a 12" earth auger than I am making.
A: You could however if the pressure builds above the shift point of the pump the flow rate will drop considerably. At 11 GPM it will turn about 140 RPM but in 2nd stage it will drop to 3.4 RPM (this can vary with which pump you purchase) that will cut speed to 40 RPM. The shifting takes place automatically at about 650 PSI.