Planter Marker Sequence Valve Cross Mfg 128513

Item Number: 9-4414

Price: $102.85
TOP
Back to top

Planter Marker Sequence Valve Cross Mfg 128513

Planter Marker Sequence Valve Cross Mfg 128513

item number: 9-4414 PRICE: $102.85 Out of Stock - More on Order Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-4414
Planter Marker Sequence Valve Cross Mfg 128513
Item Number: 9-4414
Price: $102.85
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 33 of our current catalog
Description
Planter Marker Valve


• Brand new, CROSS. Sequence valve designed to alternately operate a pair of agricultural guide marker cylinders on a planter row marker system. Valve plumbs into the lift cylinder circuit on the planter. Can be used on single or double acting marker cylinders. Rated 2500 PSI, 2 GPM, three ports SAE 8. Shpg. 6 lbs.



California
Residents
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

More Specs

MORE INFO

Click to view...

Click on boxes below for more information about this product.
InstructionsMore SpecsAdditional InformationMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 6

Can you ship to Portugal?

A: We do ship worldwide. Please contact our Customer Service department with your order and shipping information and we can provide an international quote.

After planting for a couple hours, the right marker wants to raise by itself or the left marker will drop. It is always the right marker. It is always after several hours of planting. IH 800 planter. I only removed the old IH electric switches when I put this SQV on. The lift rams for the machine still go thru the IH valve block. thoughts?

A: It's likely that after the oil gets past a certain temperature due to extended use, the viscosity drops enough to slip past the wear in the tractor's valving at a high enough rate to actuate the sequence valve.

is this the sequence valve for a yetter marker system I have on a 750 JD no till drill?

A: We have no information to say that it is the same as the original equipment on that system.

Am I correct in assuming that partially lifting the down marker to clear an obstruction will not change the valve so that the same marker can be relowered? I'm hoping that the valve will not shift to the opposite circuit until the cylinder being operated "bottoms out" and creates enough pressure to cause the valve to shift.

A: According to the manufacturer anytime the action of the cylinder is reversed, whether it be partially or not, the sequence shuttle will be triggered to shift to the next action. If actuated slowly enough, it may be possible to avoid having to cycle the sequence, but their engineers are not certain.

What size are the inlet and outlet ports?

A: Ports are SAE 8 (ORB 3/4-16). Same size for all 3 ports.

How do you plumb the CROSS PLANTER MARKER SEQUENCE VALVE ? I am using it for markers on my planter, operating a double acting cylinder on each side. Also does it allow both markers to be in the raised position for transport? Thanks

A: Please click on the additional information link to the right. This provides all the plumbing info for this valve.

Recently Viewed
Email a Friend
Planter Marker Sequence Valve Cross Mfg 128513
Item Number: 9-4414
Price: $102.85
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

Planter Marker Sequence Valve Cross Mfg 128513
Additional Comments:

Please wait...
Newsletter SignUp