1:1 60 HP Curtis RA 412M Gearbox 921874

Item Number: 1325

Price: $508.25
Back to top

1:1 60 HP Curtis RA 412M Gearbox 921874

1:1 60 HP Curtis RA 412M Gearbox 921874

item number: 1325 PRICE: $508.25 6 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 1325
1:1 60 HP Curtis RA 412M Gearbox 921874
Item Number: 1325
Price: $508.25
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 132 of our current catalog
Brand new CURTIS Right Angle Gear Drive. One piece cast iron gear case is precision machined for bearings and gears. Cast aluminum bearing caps. Timken roller bearings. Dual lip seals. Type F shaft arrangement. Shafts rotate in opposite directions when viewed from end.
Units are shipped dry, proper lubricant must be added prior to use.
  • 1:1 gear ratio
  • 70 HP input max int
  • 60 HP input max cont
  • 1400 RPM input max
  • 4 1/2" square 1/2" tapped mounting holes

  • Input shaft 1 1/4" dia x 2 1/2" w/keyway
  • Output shaft 1 1/4" dia x 2 1/2" w/keyway
  • Oil cap. 1 1/2 pints
  • 8" x 8" x 5 5/8"
  • Shpg. 41 lbs.
RPMMax HPTorque In-Lbs
More Specs


Click to view...

Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 6

So input shaft is turning cw is output shaft turning ccw looking at the end of each shaft

A: Yes. The shafts turn opposite as facing them.

Do you offer a 1:1 50 hp gearbox where the rotation is not changed?

A: Not in this size, no.

Is this the same as a Curtis 211 gearbox ?

A: No, this is larger than a 211. This is a 412M series.

I have a gearbox curtis 412m type f ratio 1 35:1 do you have one

A: We do not, no.


A: That would not work with this model.

In the picture of item # 1325 it shows four bolts on the aluminum cover and in the dimensional drawing it shows eight bolts holding that cover on do you know which one is right?

A: The 8 bolt cover on the dimensional diagram is correct.

Recently Viewed
Email a Friend
1:1 60 HP Curtis RA 412M Gearbox 921874
Item Number: 1325
Price: $508.25
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1:1 60 HP Curtis RA 412M Gearbox 921874
Additional Comments:

Please wait...