3 BOLT FLANGE BRACKET BEARING New, 3 hole flange bracket bearing. Cast iron construction with self-aligning ball bearing insert and grease zerk. Set screw on the inner race to lock shaft. SPECIFICATIONS
A: The bolt hole spacing from center to center is 3.543".
Date Submitted: 08/17/2019
How many degrees of misalignment is allowed on a self centering bearing?
A: The maximum angle on the tested unit of this item-if mounted with no space restrictions to allow full tilt of the bearing-was roughly 53 degrees off true.
Date Submitted: 03/14/2018
What load will this bearing carry?
A: At 33 1/3rd rpm, this bearing is rated for 2226 lbs. At 5000 rpm, the rating is 420 lbs.
Date Submitted: 04/09/2017
What is meant by self aligning in the description of this bearing?
A: The bearing will pivot in the housing to align to the shaft, if the mounting surface is off angle to the shaft. Out of the box the pivoting is a bit stiff, but frees up considerably with a bit of grease and being broken loose.