Are any of your high-pressure pumps capable of pumping seawater?
A: They are not meant for liquids with the viscosity of water. They rely on the lubricating effects of the oil they pump for proper operation as well as cooling.
Date Submitted: 09/24/2018
Can this pump.be belt driven with a htd pulley directly on the shaft? Does it have bearings on both ends of the pump?
A: These pumps are not rated for side loading. They are supported at the shaft by a sleeve bushing. Pulley driving will cause premature failure, with the length of life dependent on the belt tension.
Date Submitted: 11/13/2016
The pump states CW direction. Is this looking at the end of the shaft? This is what I assume it means but do not want to end up with wrong direction pump.
A: We call out rotation direction as facing the pump shaft.
Date Submitted: 09/26/2016
Hi, Does the pump GPF1027PA support contnuos duty? For example to be recirculating oil and lift pressure up to 1600 psi like 40 times per hour? If not, which pump can you recommend? Than you!
A: Yes, these pumps can be operated continuously. Make sure you have an adequate reservoir size to keep the oil at proper temperature. Use 1 gallon of tank capacity for each gallon the pump is producing.