0.61 cu in Dynamic GPF2010PA Hydraulic Pump

Item Number: 9-7789-D

Price: $116.75
TOP
Back to top

0.61 cu in Dynamic GPF2010PA Hydraulic Pump

0.61 cu in Dynamic GPF2010PA Hydraulic Pump

item number: 9-7789-D PRICE: $116.75 Out of Stock - More on Order Regular Stock Item


calculate shipping
Calculate Shipping for Item 9-7789-D
0.61 cu in Dynamic GPF2010PA Hydraulic Pump
Item Number: 9-7789-D
Price: $116.75
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 40 of our current catalog

You may also consider:

Description
0.61 cu in DYNAMIC GPF2010PA HYD PUMP
Brand new, DYNAMIC GP-F20 series hydraulic gear pump. Aluminum center section with cast iron end covers.

SPECIFICATIONS
  • Disp. 0.61 cu. in. / rev.
  • Pump Type Gear
  • Rotation CCW
  • Pressure:
      3650 PSI peak
  • Speed:
      2000 RPM rated
      3600 RPM max.
  • Flow:
      4.91 GPM rated
      8.84 GPM max.
  • Mount 2 bolt SAE A
  • Shaft 5/8" dia. x 1-1/4" long keyed with 5/32" wide keyway
  • Rqd. Filtration 25 micron
  • Inlet Port SAE 12
  • Outlet Port SAE 10
  • Size 4-1/8" x 5-1/8" x 4-1/2"
  • Shpg. 10 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 5

Thanks for the rule of thumb. So if I could correctly mount this pump on my JD 317 lawn tractor at 3000 rpm (could pulley it up for more rpm if beneficial) what would be the potential gpm (displacement) and psi be? What size hydraulic motor would match up to it?

A: These pumps are not meant for pulley drive. Doing so will greatly reduce the lifespan of the pump. At 3000 rpm this pump would put out 7.9 gpm, and with 17 Hp available on that unit you would be able to see, at best; 2300 psi if the engine were running at full throttle and power was not being used anywhere else. We don't have any specifications of what the intended rpm and power range for the hydraulic motor will be to begin to offer any suggestion as to what may work with those input values.

I have a crane that needs 8gpm @ 2200 psi. So if I run it at max speed will it want to run at max rated psi or will that be determined by the settings on the crane? The crane has an adjustment for pressure. So I am assuming if it's set at 2200psi then pump will accommodate that?

A: Any positive displacement pump will try to develop maximum pressure which will require a relief valve in the system to regulate. If you have an operating relief valve in the system it will control it.

I know the pump is driven CCW, but is that looking at the back of the pump (opposite side of the shaft)?

A: We define rotation as facing into the shaft.

Is it ok to use a belt drive with this pump? I want to use it on a small johnson loader (15 hp tractor). I believe the max psi is no greater than 600. Would run this one at 1800 rpm's.

A: These pumps are not rated for side load. They may work for a while, but their lifespan will be shortened.

What size gas engine will run this pump at 2500 psi?

A: This would require about 22 HP at 3600 rpm on a gas engine. A general rule of thumb is 1 hp per gallon at 1500 PSI with electric motors; with about 1.6 times that power needed for gas engine drive.

Recently Viewed

You may also consider:

Email a Friend
0.61 cu in Dynamic GPF2010PA Hydraulic Pump
Item Number: 9-7789-D
Price: $116.75
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

0.61 cu in Dynamic GPF2010PA Hydraulic Pump
Additional Comments:

Please wait...
Newsletter SignUp