11.34" Stroke 1000 lbs 12 Volt DC Linear Actuator

Item Number: 5-1680-12

Price: $310.85
TOP
Back to top

11.34" Stroke 1000 lbs 12 Volt DC Linear Actuator

11.34" Stroke 1000 lbs 12 Volt DC Linear Actuator

item number: 5-1680-12 PRICE: $310.85 41 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 5-1680-12
11.34" Stroke 1000 lbs 12 Volt DC Linear Actuator
Item Number: 5-1680-12
Price: $310.85
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 162 of our current catalog
Description
12 VDC 1000 LB. LINEAR ACTUATOR
Brand new, GLIDEFORCE model LACT12-1000B heavy duty linear actuator. Ball screw drive with built-in overload clutch. Metal housing is water resistant and sealed against dust. Permanent magnet motor. No limit switches or potentiometer.

SPECIFICATIONS
  • Stroke 288 mm (11.34")
  • Voltage 12 DC
  • Push/Pull Rating
      Dynamic 1000 lbs. max
  • Extension Speed
      No Load 0.66 in/sec
      Max Load 0.56 in/sec
  • Amps
      No Load 2.4
      Full Load 13.2
  • Duty 25%
  • Gear Ratio  20:1
  • Operational Temperature Range
       -13° F to +149° F
  • Enclosure IP65
  • Pin Holes 1/2"
  • Retracted Length 20.08"
  • Shaft Dia. 1-1/8"
  • Size 21.10" x 3.04" x 5.97"
  • Shpg. 17 lbs.
More Specs
Click on boxes below for more information about this product.
Wiring DiagramMore SpecsAdditional InformationMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 6

Can you turn the mount hole on the motor and 90 degrees?

A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.

Do these actuators have factory set limits?

A: They do not have limit switches, only the racheting overload clutch.

Can the lower mounting bolt be removed so that the actuator can sit flat and flush against the floor?

A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.

Wanted to know if you had a linear lift that would fit my Kubota 900. Wouldn't be lifting more than 600lbs.

A: This should be heavy enough. There is no specific application for this actuator. Measure what the retracted and extended lengths (center to center on the pins) that your application requires.

I have a lawn tractor that I would like to use a linear actuator to angle a 42" snow blade left or right with. Do you have a linear actuator to do something like this or is this not possible?

A: This actuator is rated to push up to 1000 lbs. However it might not be able to hold it when pushing. A hydraulic system might be better.

do you have an inverter for that actuator 110ac to 12dc?

A: Sorry we don't have any power supplies with sufficient output for these actuators.

Recently Viewed
Email a Friend
11.34" Stroke 1000 lbs 12 Volt DC Linear Actuator
Item Number: 5-1680-12
Price: $310.85
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

11.34" Stroke 1000 lbs 12 Volt DC Linear Actuator
Additional Comments:

Please wait...
Newsletter SignUp