1" Bore 3.7 OD 1800 RPM Pulley Centrifugal Clutch

Item Number: 1-3974-100

Price: $75.95
TOP
Back to top

1" Bore 3.7 OD 1800 RPM Pulley Centrifugal Clutch

1" Bore 3.7 OD 1800 RPM Pulley Centrifugal Clutch

item number: 1-3974-100 PRICE: $75.95 28 In Stock Regular Stock Item
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov


calculate shipping
Calculate Shipping for Item 1-3974-100
1" Bore 3.7 OD 1800 RPM Pulley Centrifugal Clutch
Item Number: 1-3974-100
Price: $75.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 133 of our current catalog
Description
PULLEY CENTRIFUGAL CLUTCH W/BEARINGS
Brand new, HILLIARD EXTREME DUTY model LD4P-60 pulley centrifugal clutch with bearings. Ideal for chipper shredders, power trowels, concrete mixers, power screeds, air compressors and lawn and garden equipment. Thermodynamically designed clutch shoe increases the clutch''s capacity to absorb heat without damaging clutch springs, resulting in longer life and greater reliability. Easy to install. Overload protection. Made in USA.

SPECIFICATIONS
  • Maximum HorsePower 13 HP
  • Rotation Bi-directional
  • Engaging Speed 1800 RPM
  • Bore 1" dia. x 2-3/8" w/ 1/4" integral Key
  • Pulley Diameter 3.7"
  • Works with A or B Belt
  • Size 4-1/4" dia. x 2-3/8"
  • Shpg. 4 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 10

does it fit for a 1/2 inch wide belt

A: Yes, this pulley will work with either 1/2" or 5/8" belts.

Can you recommend this type of clutch for a 16hp engine? 1 inch bore with 1/4 inch keyway?

A: These clutches are only rated for 13 Hp max. We cannot recommend use with excessive horsepower.

Do you ship to Canada? Can you send to post office box #? Thank You

A: We do ship to Canda. Please contact our Customer Service department and they can get you accurate postage figures.

Do you have information for the Datum Diameters for Belt Types A (1/2"), and Belt Type B for the 3.7" Centrifugal Clutch pulley in item number: 1-3974-100? Thanks, George

A: Hilliard does not publish the datum diameters for their pulley-type clutches, unfortunately.

Can I buy this type of clutch with dual belts?

A: No, that is not available from our vendor.

How is the clutch held on the engine shaft?

A: Typically with a backing washer and bolt threaded into the shaft.

Do you ship to the uk? And if so at what cost?

A: We do. Please contact our Customer Service department with your information and we can get you an international quote.

What size belts will this run?

A: The description states that it will run A (1/2) or B (5/8) belts.

Is there a product similar to this that is rated for higher horsepower, such as 22 hp or greater? Thanks.

A: Not that we have, no.

Will this fit a briggs and startton 1150 series 11.5 hp motor

A: Yes it should. It would be best to verify that the particular engine you are going to use it with has a 1" diameter crankshaft.

Recently Viewed
Email a Friend
1" Bore 3.7 OD 1800 RPM Pulley Centrifugal Clutch
Item Number: 1-3974-100
Price: $75.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1" Bore 3.7 OD 1800 RPM Pulley Centrifugal Clutch
Additional Comments:

Please wait...
Newsletter SignUp