Hydra Force 12 Volt DC NC Solenoid Valve

Item Number: 9-5112-NC

Price: $65.95
Back to top

Hydra Force 12 Volt DC NC Solenoid Valve

Hydra Force 12 Volt DC NC Solenoid Valve

item number: 9-5112-NC PRICE: $65.95 90 In Stock Regular Stock Item

calculate shipping
Calculate Shipping for Item 9-5112-NC
Hydra Force 12 Volt DC NC Solenoid Valve
Item Number: 9-5112-NC
Price: $65.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 32 of our current catalog

You may also consider:

Brand new, HYDRAFORCE model SV10-22-0-N-00 solenoid-operated, 2-way, poppet type valve. Use for starting, stopping, or dumping of hydraulic circuits to 3000 PSI. Continuous rated solenoid with hardened seat for long life and low leakage.

When de-energized, the valve acts as a check valve, allowing flow to pass from port 1 to port 2, while blocking flow from port 2 to port 1. When energized, the poppet lifts to open the port 2 to port 1 flow path. In this mode, flow is also allowed from port 1 to port 2.

  • Voltage 12 VDC
  • Amperage 1.67 Amps
  • Flow 12-15 GPM max.
  • Pressure 3,000 PSI PSI max.
  • Duty Continuous
  • Ports SAE 8
  • Shpg. 2 lbs.

Valve consists of HydraForce part numbers:
Coil 6352012
Body 7024280
Cartridge SV10-22-0-N-00

More Specs


Click to view...

Ask A Question
Submit a question for this product

Showing Questions of 15

Can this solenoid be safely submerged in oil (specifically, automatic transmission fluid) without negatively impacting the function, longevity, or durability of the solenoid coil?

A: No this solenoid cannot be submerged under any liquid.

Using valve to open and close a control circuit. Does this valve require a minimum pressure to open?

A: No this valve does not require a minimum pressure to open.

What is the physical dimensions of the aluminum valve block?

A: As pictured: 2.034" wide; 2.024" tall, and 1.25" deep/thick.

will this work with brake fluid? What is the flow rating of the valve in the open configuration?

A: This cartridges uses Buna-N seals, which do not work well with most common brake fluids. It is not recommended for use with brake fluid. The pass-through flow is rated at 15 gpm.

Will this work with 24vs

A: No, the coils are only rated for 12vdc.

What type of leads are on the coil? And what type fittings screw into the ports? What thread is it?

A: The coil has bare wire leads, roughly 18" long. The block is threaded SAE 8 (O-ring Boss) which is 3/4"-16 thread.

Would this valve hold a corn planter marker arm up when off and allow it to float when powered ?

A: Please consult the instructions on this item's web page to see the description of the functioning, and see how it would fit into your system's plumbing to determine if that would give you the desired operation.

What is the working temperature range for the Solenoid Valve in this link http://www.surpluscenter.com/Brands/Hydraforce/Hydra-Force-12-Volt-DC-NC-Solenoid-Valve-9-5112-NC.axd

A: With standard Buna seals: -40 to 100 °C (-40 to 212 °F).

Could you tell me the country if manufacture. I will be shipping this to the USA Canada border and import it to Canada. Made in USA has no tariffs. Thx

A: All the components for this product are listed with the USA as the origin.

1) can this valve be mounted horizontally, that is with the solenoid on its side instead of vertical as shown in your pictures? 2) it is currently back-ordered. When do you expect to have additional stock? thanks

A: This valve can be mounted and operated in any position. We have orders in for more components due any day. Check the website and it will be updated when they are back in stock.

I have a single action ram that fluid flows in and is forced back out the same line by springs. I need a 2 way 12 volt valve that will be closed both ways until energized. I am using this on my motorhome to add a second jack to the front where it only had one jack.

A: In it's resting state, this valve acts as a check valve and will allow fluid to travel from port 1 to port 2, and blocking the reverse flow. When energized, flow in both directions is allowed. Based on your description, this valve will not do what you want.

What s the maximum fluid temperature for this item?

A: With standard Buna seals: -40 to 100 °C (-40 to 212 °F).

The duty of the valve is continuous, but with a sufficiently low pwm frequency, could this be converted to a flow control valve?

A: The cartridge itself is of the on/off type, and could not be controlled by pulse width modulation to achieve flow control.

Could 2 of these be used as a electric float valve for one double acting cylinder?

A: If plumbed correctly, it seems reasonable that could work. Be aware of the direction which the check valve checks if doing so.

I have a dump trailer with a open center pump and valve on it that runs a single acting, telescoping hoist, and would like to replace manuel valve with a 12 volt valve , so that I can make up a pendant control witch elec, valve do I need, it will just raise and dump to lower,,

A: You could put a check valve in the line between the pump to only allow flow out to the cylinder. The install the 9-5112-NC with a tee in the line between the check valve and cylinder with the other side going back to your reservoir. When the valve is activated it would allow the cylinder to drain down bypassing the check valve.

Recently Viewed

You may also consider:

Email a Friend
Hydra Force 12 Volt DC NC Solenoid Valve
Item Number: 9-5112-NC
Price: $65.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

Hydra Force 12 Volt DC NC Solenoid Valve
Additional Comments:

Please wait...
Newsletter SignUp