New, Hydraforce. A screw-in, cartridge-style, fixed orifice, pressure-compensated, bypass-type hydraulic flow regulating valve, with limited range adjustment from a pre-determined nominal setting. The FR10-30A maintains a constant flow rate out of port 3 regardless of load pressure changes in the circuit downstream of port 3, or in the bypass leg at 2. The valve will pressure-compensate once a minimum pressure drop (determined by spring adjustment setting) is achieved from 1 to 3. This value will range from approximately 4.8 to 13.8 bar (70 to 200 psi). The cartridge may be adjusted to �25% of nominal setting. At nominal setting, pressure drop is approximately 9 bar (130 psi). Flow out of priority port 3 may vary based on input flow amount, particularly with lower temperatures and increased fluid viscosities. Settings may need to be established through correlation study. Consult factory.
Type Flow Regulator, Pressure Compensated
Pressure Rating 3000 PSI max.
Pressure Setting None
Flow 6 GPM max.
Fits into VC10-3 Cavity
Features 1/4" Hex Allen head adjustment option, 1.5 - 2.5 GPM flow rate standard setting, Cartridge Only