5 HP Special Duty 230 Volt AC 3450 RPM Air Compressor Motor Leeson 116523

Item Number: 10-2530

Price: $260.90
Back to top

5 HP Special Duty 230 Volt AC 3450 RPM Air Compressor Motor Leeson 116523

5 HP Special Duty 230 Volt AC 3450 RPM Air Compressor Motor Leeson 116523

item number: 10-2530 PRICE: $260.90 56 In Stock Regular Stock Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 10-2530
5 HP Special Duty 230 Volt AC 3450 RPM Air Compressor Motor Leeson 116523
Item Number: 10-2530
Price: $260.90
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 148 of our current catalog
Brand new, LEESON ELECTRIC model 116523  Special duty motor designed to replace motors on compressors. Motor is rated for a breakdown torque of 5 HP and a continuous compressor duty at 3 HP.  Overload protection with manual reset. Steel frame and base. Welded base. Capacitor start/capacitor run.

Confirm your motor name plate data tag including voltage, amperage, speed, frame and shaft diameter to match this motor specifications for proper operation.

  • Brand Leeson
  • Model 116523
  • Power 5 HP Definite Purpose Special Compressor Duty 
  • Voltage 208-230 VAC
  • Amperage 15 Amps
  • Speed 3450 RPM
  • Phase 1
  • Rotation Reversible (prewired for CCW facing shaft)
  • Service Factor 1.0
  • Bearings Ball
  • Enclosure ODP
  • Duty Continuous Compressor Duty
  • Frame 56
  • Mount Base
  • Shaft 5/8" diam. x 1-7/8" w/ 3/16" keyway
  • Size 9-1/4" x 7" x 8"
  • Shpg. 38 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 19

Would this motor fit an Ingersoll Rand air compressor model number 23378805 it a 5hp rpm 3450 it's an Emerson motor T063BVDMM-1831

A: No. It appears that item 10-2621 may be more like what the original motor was.

how do you connect this motor to run in ccw with only 3 wire connection

A: The wiring diagram is printed on the data plate. Only the necessary connections are available; all other wiring is not accessible.

please recommend a pump flange and love joy to mate this motor to hydraulic pump, part number : 9-7503-16 thanks,

A: We do not recommend this motor for use with that pump, as it will not have enough power to drive the shift into the high-pressure function. Additionally, it is not rated for the duty cycle at which hydraulic pump drives operate.

is this a replacement motor for emerson part number 54421193 thanks

A: No. You would need to look at 10-2621 for a comparable motor.

I have a sanborn 2 stage compressor and all the original motor numbers match up with the exception of the amperage. yours is 15amps and mine is 22 amps. will your electric motor work for my compressor?

A: If the current does not match and our is lower, it will likely be lower horsepower and there is a good chance that it will not work.

have this 5 hp motor running 2 stage compressor,, need new presure switch wich one do I need ?

A: It would be best to use the 4-1823-series. It's still a little light for the startup current, but it's the highest rated that we have. You then have the options for on/off pressure ranges and single or 4 port models.

How much wall space do you need for this motor

A: This links to the drawing of the motor from the manufacturer. Use the -756 dimensions where applicable. http://www.leeson.com/CnxDocRequest/PublishedPDF/100146le_45871_365.pdf

Would like to know were to hook my black and white wire.i don't know what CCW and CW mean.can u just tell me the numbers so I can get this over please.thnx

A: One line of 230 VAC power will go to LINE 1(1). The other line of 230 VAC power will go to LINE 2 (4). With Black also connected to LINE 2 (4) and Red connected to (2) the motor will turn CW-clockwise facing shaft-turns to the right. If the opposite rotation is needed switch the Black and Red wire positions with each other.

Is this motor a replacement for an Emerson 56283138? Thanks

A: From the information regarding that particular motor model available on the internet, it appears our motor draws significantly less current and would not perform the same to replace it. That model and replacements for it appear to pull 20-22 amps, and ours only pulls 15.

Could this motor be coupled with a 16 gpm log splitter pump used in a press application?

A: No, this motor doesn't have the horsepower to shift the pump into the high pressure side. It is also not suited to the duty cycle for driving a hydraulic pump.

what does service factor refer to?

A: NEMA standards define service factor as: Motor Service Factor (SF) is the percentage of overloading the motor can handle for short periods when operating normally within the correct voltage tolerances. Operating a motor at loads greater than it's nameplate horsepower for extended periods will lead to shortened motor life/failure.

is there a wiring diagram for this motor ?

A: There is a wiring diagram on the nameplate of the motor.

Where is this motor manufactured ?

A: This motor is made in the U.S.A.

do you have a similar motor compared with10-2621 that would have a 7/8 shaft and reversible??? that would drive a large face planer??? also when listing rotation , are you facing shaft or( wire end) le to determine direction??? thanks paul

A: Air compressor motors are specifically built for that application and not recommended for other uses such as a planer. They are for high starting loads and lower running loads while a planer is just the opposite. Item 10-2753 would be better although it does have a 1-1/8" dia. shaft.

Is there any reason I can't use this motor on a table saw (assuming it physically fits?).

A: This motor is specifically built for air compressors. It has high starting torque but less for running and would not be recommended for use with a table saw.

Do you 5hp 1ph 3450 rpm motor in c face type?

A: Yes, please see item 10-2887.

Is this motor single-phase or three-phase?

A: This is a single phase motor.

What is the warranty on this motor??

A: One year warranty.

do I need, or is it recommended that I have, a separate magnetic motor starter to run this motor?

A: Most times these are just used with a pressure switch that has heavy enough contacts for the motor amperage. A magnetic starter would be better solution for long life.

Recently Viewed
Email a Friend
5 HP Special Duty 230 Volt AC 3450 RPM Air Compressor Motor Leeson 116523
Item Number: 10-2530
Price: $260.90
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

5 HP Special Duty 230 Volt AC 3450 RPM Air Compressor Motor Leeson 116523
Additional Comments:

Please wait...
Newsletter SignUp