50:50 ROTARY FLOW DIVIDER Brand new, MTE 200 series model P205R-5465. Hydraulic gear type rotary flow dividers. Accurately divide flow from one source into two or more equal proportionate flows. Relief valves do not limit system pressure, they only limit differential pressure from outlets to inlet.
Flow Division 50:50
Displacement per Section 0.251 cu. in. /rev.
Input Flow Minimum Input 4.346 GPM Maximum Input 9.78 GPM
Output Flow per Section Minimum Output 2.173 GPM Maximum Output 4.89 GPM
Pressure Maximum Input 3000 PSI Maximum Output 3500 PSI
Factory Set Differential PSI Between Sections 750 PSI
So if the minimum gpm input is not reached the unit does not allow any fluid through?
A: If the minimum GPM input isn't met this valve will not divide flow into 2 equal parts
Date Submitted: 01/31/2019
What function does the relief valves have for the balancing of the flow?
A: The function of the relief valves is not for the balancing function of the divider, but to protect the divider from excessive pressure differentials due to other component failures, plumbing issues, or pressure intensification while combining flows.
Date Submitted: 04/06/2018
If one cylinder stops moving will the other cylinder keep going
A: Yes. Fully actuating the cylinders to deadhead at the unloaded end of the stroke will be required to re-set/zero the divider's output.
Date Submitted: 06/16/2017
Are these one way valves or is the flow reversible
A: This valve will divide one direction, and combine the other.