150 CFM 48 Volt DC Nidec Fan

Item Number: 16-1371

Price: $4.99
Back to top

150 CFM 48 Volt DC Nidec Fan

150 CFM 48 Volt DC Nidec Fan

item number: 16-1371 PRICE: $4.99 38 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 16-1371
150 CFM 48 Volt DC Nidec Fan
Item Number: 16-1371
Price: $4.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
150 CFM 48 VDC FAN

New, Nidec TA500DC model A34362. Very quiet 52.5 db. Ball bearings. Die cast housing with thermoplastic impellor. Operating voltage range 24-56.

  • Flow 150 CFM max.
  • Voltage 48 DC
  • Amperage 0.28 Amps
  • Power 13.4 Watts
  • Speed 3450 RPM
  • Mount Dual 4.46" sq. and 4.13" sq.
  • Blade Dia. 4-3/4"
  • Number of Blades 5
  • Size 5" x 5" x 1.5"
  • Shpg. 1 lb.
More Specs


Click to view...

Click on boxes below for more information about this product.
Wiring DiagramMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 3

Can the third wire be used for variable speed, if not do you have a 48VDC fan the same size with variable speed. Thanks, Jerry

A: We don't have information on the use of the 3rd wire. We don't have any fans with a built in speed control.

can I wire it to a 110 voltage?

A: No this operates from 48 Volt DC power. You could use a step down power supply that is 110 Volt AC input and 48 Volt DC output. But probably better just to buy a fan designed for 110 Volt AC input. We have several to choose from.

I would like to use these in a lumber drying kiln. The kiln temperatures could reach upwards of 200 degrees F. would these fans hold up to that kind of heat?

A: I don't have a temperature rating but I would be a little leary of the thermoplastic impellor withstanding that much heat.

Recently Viewed
Email a Friend
150 CFM 48 Volt DC Nidec Fan
Item Number: 16-1371
Price: $4.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

150 CFM 48 Volt DC Nidec Fan
Additional Comments:

Please wait...
Newsletter SignUp