I'm looking for MA-6A are there any interchangeable or where can I find this one? It may be outdated
A: We have no information from Ogura to determine compatibility.
Date Submitted: 11/11/2018
Can you send me and overal drawing for part: 12 Volt DC Two A-Belts Clutch (Fits 9-1737 & 9-1738) ITEM NUMBER: 1-2184. Are they available for 24V DC as well?
We do not stock these in 24vdc.
Date Submitted: 06/28/2018
part number I am looking for is MA-7A-C 202. Is this the same item or will it fit?
A: This is marked MA-7A-C. We are unaware of the significance of the ending numbers. They may indicate what customer they were produced for, or some other feature. We have no literature to confirm any conjecture.
Date Submitted: 12/13/2017
i'm looking at item 1-2184 it shows it has 4 hole coil mount I need a 3 hole mount can you help me
A: No, this is the only mount style available that we carry.
Date Submitted: 10/30/2017
This looks like it will work on a Commerical intertech hydraulic pump with a 7/8 " tapered shaft.
A: This clutch was made to fit our clutch pumps, which have a 22 MM x 2-1/4" Tapered shaft.
Date Submitted: 09/13/2017
Are these the same clutches as used on air conditioning compressors?
A: We are not aware of any cross to that application.
Date Submitted: 05/22/2017
I like to replace a pressure washer pump pulley with this clutch pulley. It is a belt driven pressure washer. I don't want my pump running when idle, but at the same time I don't want to shut of the engine. Can i use this clutch pulley? what size of battery that will keep this clutch working for about 5hr without recharge? my engine is a honda gx390
A: We do not have enough information to say if it will work, and what battery size is needed.
Date Submitted: 03/07/2017
It looks like 7" is the OD, but what is the belt diameter for an A belt?
A: The outer diameter of an A belt wrapped hand-tight on this pulley is 7 3/32".
Date Submitted: 04/21/2016
I have the Ogura Ma-7a-c Electric clutch on my PTO but the Model number is 051216 will this be the same size as the 512606 I cant take the old one off to know the shaft stuff until the new one arrives so I'm hoping the numbers will tell you to give me an answer Thank you
A: Sorry we don't have info on any other models of clutch. This item is most commonly used with hydraulic pumps that have a tapered shaft so I doubt if it will work on your PTO.
Date Submitted: 05/23/2015
What is the maximum RPM?
A: 3000 rpm
Date Submitted: 03/24/2014
HELLO. ANDREAS. I NEET THES 12V DC ELECTROMAGNETIC CLUTCH. IS PACEPOL TO FIT THES ON MY HYDROLIC BELT PUMP SO I HAVE THE BELT ON AT ALL THE TAIM AND START THE PUMP WENN I NEET SO I DONT NEET TO TAKE OF THE BELT EVRY TAIM PUPM IS OFF.. AND TEH MAGNET WILL MEYBE TAKE 100 OR 150 KILOS WAIT .. IS PACEPOL ??
A: These clutches only fit onto pumps with a tapered shaft. You are correct that the main purpose is to be able to have the hydraulics only operate when desired. Current draw is about 4 amps.