SELECTOR VALVE Brand New PRINCE Two position two-way selector valve to allow one pump source to select between two hydraulic circuits. Also use to select between two different single acting hydraulic cylinders from one valve.
I asked a similar question about your 12295 valve. I'm adding a snowblower to a Kubota L4610 tractor. Can I use this to divert between the bucket dump cylinders and the snowblower cylinder?. One direction would be to the 2 bucket cylinders and the other direction would he to the single snowblower cylinder
A: This would work only if both functions were single acting. If one or both functions are double acting, a double selector valve should be used. Please contact our Product Support department for further assistance if necessary.
Date Submitted: 11/14/2018
can this item be used for a power beyond application
A: This is a single selector valve. It only directs flow from the inlet port to one of the two outlet ports at one time.
Date Submitted: 09/29/2018
Can the ports be reversed, two inlets and one outlet. I have a drive motor that I want to control through two different circuits. One circuit will have a flow control and one won't
A: That would be an acceptable use.
Date Submitted: 08/03/2017
Why are there 4 ports on the valve? Thanks
A: The fourth port is an alternate inlet position.
Date Submitted: 03/07/2017
When the valve is operated in will it stay in that position and when pulled out Will it stay in that position? No spring back position? Thank you for your time
A: Yes, the valve will stay in position. There is no detent or spring-to-center action.