3/8 NPT Hydraulic Flow Control Valve w/ Relief Prince Mfg RDRS-137-8

Item Number: 9-064-38

Price: $104.70
TOP
Back to top

3/8 NPT Hydraulic Flow Control Valve w/ Relief Prince Mfg RDRS-137-8

3/8 NPT Hydraulic Flow Control Valve w/ Relief Prince Mfg RDRS-137-8

item number: 9-064-38 PRICE: $104.70 5 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-064-38
3/8 NPT Hydraulic Flow Control Valve w/ Relief Prince Mfg RDRS-137-8
Item Number: 9-064-38
Price: $104.70
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 36 of our current catalog
Description
FLOW CONTROL
Brand new PRINCE. Speed remain constant regardless of load. "Controlled flow" port is proportional to orifice dia that changes from full closed to full open. Pressure conpensated OUT flows.
Three female threaded ports.

SPECIFICATIONS
  • 3000 PSI
  • Built-in adjustable 1000 to 2500 PSI relief set at 1500 PSI
  • Size 5" x 4 1/4" x 3"
  • Ports 3/8" NPT
  • 0-8 GPM
  • Shpg 8 lbs
More Specs

MORE INFO

Click to view...

Ask A Question
Submit a question for this product

Showing Questions of 4

On a Kabota 3901 tractor with a backhoe, I would like to be able to switch the out rigger hydraulic flow to open and close a hydraulic thumb then back to the outrigger. With this be the best valve to use?

A: No. This is a flow control valve. It sounds like you want a double selector like 9-4128.

Can I use this valve before the directional control valve as a system relief. It would be used in a very simple one direction system driving a hydraulic motor only.

A: As long as the excess flow port has a passage back to the tank, it would act as a system relief if the relief pressure is lower than the directional control valve's relief setting, if available. It would also provide speed control for the system.

What is the adjustable range for the relief valve?

A: The adjustment range is 1000-2500 PSI.

does this device allow unrestricted flow in one direction and controlled flow in the other direction?

A: Flow is only from the inlet toward the outlet. If your system requires a reverse flow also it is necessary to install a check valve in parallel with this valve.

Recently Viewed
Email a Friend
3/8 NPT Hydraulic Flow Control Valve w/ Relief Prince Mfg RDRS-137-8
Item Number: 9-064-38
Price: $104.70
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3/8 NPT Hydraulic Flow Control Valve w/ Relief Prince Mfg RDRS-137-8
Additional Comments:

Please wait...
Newsletter SignUp