Prince RD1075SH(IP/ED) Sequence Valve

Item Number: 9-4708

Price: $172.50
Back to top

Prince RD1075SH(IP/ED) Sequence Valve

Prince RD1075SH(IP/ED) Sequence Valve

item number: 9-4708 PRICE: $172.50 58 In Stock Regular Stock Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-4708
Prince RD1075SH(IP/ED) Sequence Valve
Item Number: 9-4708
Price: $172.50
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 33 of our current catalog
Brand new, Prince model RD1075SH. Use to have cylinders operate in sequence with each other. Adjustable pilot pressure. No oil is directed toward sequence port until inlet pressure reaches the pilot setting. Check valve allows flow from sequence to inlet port so cylinder can retract. Drain port must be connected to tank. Spool design gives smooth flow but should not be used for low leakage applications.

  • Inlet/Sequence Ports 3/4" NPT
  • Drain port 3/8" NPT
  • Adj pilot pressure 1400-2500 PSI
  • 6-1/2"x1-3/4"x4"
  • Shpg. 8 lbs.
More Specs


Click to view...

Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 3

Is there any objections on using this sequence valve with a motor instead of a cylinder at the secondary circuit? Also I was wondering If I could remove the internal check valve as I do not want the motor to turn in the opposite direction. Is there any other sequence valve (even a cardridge) that you could suggest that could handle 12gpm? Thank you!

A: We cannot state if this sequence valve would operate correctly in that fashion. Removing the internal check (if possible) would void any and all warranty. Please contact our Product Support department for further assistance.

This secuence valve have one in port and two out ports?

A: It has one input that is tee'd with the primary cylinder extend port. The sequence port if to the secondary extend port. There is also a drain port that must go back to tank. See the drawing link on the right side of the page for more info.

How many GPM is this sequence valve?

A: 30 GPM Max

Recently Viewed
Email a Friend
Prince RD1075SH(IP/ED) Sequence Valve
Item Number: 9-4708
Price: $172.50
Message for your friend:

I found this on the Surplus Center website, I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

Prince RD1075SH(IP/ED) Sequence Valve
Additional Comments:

Please wait...
Newsletter SignUp