In the dimensional drawing there is a piece that is .562 in diameter and 1.25 in long. It looks like it has a threaded hole in the .562 in face. Is that a correct assumption, and if so, what is the thread diameter and pitch. Or to put it another way, will that small piece thread on to the non-clevis end of a 9-6705-xx cable?
A: Yes. That piece pins into the handle end of the spool to allow connection to the threaded cable end for movement. These handle connection kits were made for use with those cables specifically.
Date Submitted: 01/25/2018
What is the diameter of the threaded side of the adapter that screws on the cable
A: The cable attachment is M16x1.5 thread.
Date Submitted: 01/12/2018
Does one kit work for two cables or do you need one kit per cable?
A: Each cable requires a kit.
Date Submitted: 02/09/2017
I need to know what size threads are on the cable connector and what it fits, I need one to fit a warvoil valve on a great bend loader
A: These are only designed for use with the Prince RD5000 series of valves. Will not fit onto a Walvoil valve.