1x12x0.5 DA Hydraulic Cylinder

Item Number: 9-1649-12

Price: $116.70
TOP
Back to top

1x12x0.5 DA Hydraulic Cylinder

1x12x0.5 DA Hydraulic Cylinder

item number: 9-1649-12 PRICE: $116.70 56 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 9-1649-12
1x12x0.5 DA Hydraulic Cylinder
Item Number: 9-1649-12
Price: $116.70
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 57 of our current catalog

You may also consider:

Description
1" BORE CYLINDER
Brand new. Welded cylinders with wire-lock gland retainer. For agricultural and industrial applications. Small sizes are ideal for remote control of valves, spouts, etc.

SPECIFICATIONS
  • Double Acting
  • Bore/Stroke 1" x 12"
  • 1500 PSI working pressure
  • Rod dia 1/2"


  • Ports 1/4" NPT
  • Retracted Length 18 1/2"
  • Shpg 8 lbs
END MOUNTINGS
  • Rod End Clevis
  • Pin holes 1/2"
  • Outside Ears 1"
  • Inside Ears 1/2"
  • Throat Depth 1"


  • Base End Clevis
  • Pin holes 1/2"
  • Outside Ears 1"
  • Inside Ears 1/2"
  • Throat Depth 1"
More Specs

MORE INFO

Click to view...

Instructions
Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 4

Yes I need a 1”x12” cylinder but I need a higher pressure like 5000 lbs of pressure any ideas thanks

A: We currently have nothing that operates at that pressure except for the Power Team cylinders which are a larger bore and shorter stroke.

I need two cylinders but mine have a pressure of 3000psi I don’t know about the difference thanks

A: If your system is operating at above 1500 psi, the system will have to be limited by a relief valve to protect these cylinders.

what is the extended length hole to hole

A: The extended length should be 30.5"

I need a cylinder just like this one, but I cannot tell if the clevis screws off the end of the rod? I need one with a threaded rod on the end, no mount of any type just a threaded stud. I would also like nothing on the butt of the cylinder. I could cut it off if I had too.

A: The clevises on these cylinders are welded on.

Recently Viewed

You may also consider:

Email a Friend
1x12x0.5 DA Hydraulic Cylinder
Item Number: 9-1649-12
Price: $116.70
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1x12x0.5 DA Hydraulic Cylinder
Additional Comments:

Please wait...
Newsletter SignUp