2" x 10" x 1.25" DOUBLE ROD CYLINDER Brand new double rod, steering type hydraulic cylinder. Both rod ends are drilled and tapped to accept a standard 3/4"-16 tie rod end. A pair of 1" thick steel mounting blocks are welded to cylinder body.
Double acting, double rod
Bore x stroke 2" x 10"
PSI Max. 3,000
Rod Dia. 1.25"
Ports SAE 6
Retracted length 27" (measured from end of rod to end of rod)
Shpg. 24 lb.
Both Rod Ends Drilled and Tapped
Drilled 2-1/8" deep
Tapped 3/4"-16 x 1-5/8" deep
Wrench flats at rod ends
Cylinder Body Mount
Four bolt mount on 13.50" x 3.12" centers
Untapped mounting holes for 3/8" dia. socket head bolts
I am going to put male rod ends on cylinder does it take a left and right hand thread or are they both right hand threads
A: Right hand.
Date Submitted: 02/11/2019
Some steering cylinders utilize dual seals to avoid a blowout. How are these designed internally? Also, do you offer rebuild kits for these for down the road or are they throwaway cylinders?
A: These cylinders appear to use a double-lip seal on the piston as opposed to two seals. Seal kits are available as item 9-6886.
Date Submitted: 10/07/2018
When is this ram going to be back in stock?
A: After consulting with our manufacturer yet again, we expect to have stock 9/7.
Date Submitted: 07/30/2018
When will you have these in stock?
A: We have a shipment due 7/27. Check our website the following day to see if the stock has updated.
Date Submitted: 07/23/2018
It is now May, when do you forsee this item being available again?
A: We are waiting to hear from the vendor when they will fulfill our overdue orders.
Date Submitted: 05/08/2018
When will these be back in stock?
A: We currently have a shipment on order, due 4/06/18.
Date Submitted: 02/22/2018
I purchased a double ended ram where can i find clevis mounts that thread in to the ram if possible can i get a part number
A: We do not currently have any clevises that thread into the rod. We have swivel eye rod ends, but what we have is not strong enough for the forces the cylinder can generate.
Date Submitted: 03/29/2017
Is 9-6846 double acting cylinder a true in stock item. When I order I will have only about a week window for it to arrive in Thanks
A: As of 10/4/16, we have 19 in stock.
Date Submitted: 10/04/2016
How much is the maximum Force where can take this product?
A: At the 3,000 PSI maximum operating pressure the push in either direction is about 5,700 lbs.
Date Submitted: 03/22/2016
Hello, I have a questions of this cylinder. I want to connect the end of the cylinder with ball joint and can recognize what is the diameter of hole at the both end of cylinder?is the 3/4 " ?
A: Both ends of the rod are tapped 3/4"-16 x 1-5/8" deep.
Date Submitted: 03/16/2016
Is this a traditional double ended assist cylinder? Thus the end to end length from end of rod to end of rod remains constant and the rod just strokes left to right? In other wards when one rod goes in the other goes out? Thanks