2" x 8" x 1.25" DOUBLE ROD CYLINDER Brand new double rod, steering type hydraulic cylinder. Both rod ends are drilled and tapped to accept a standard 3/4"-16 tie rod end. A pair of 1" thick steel mounting blocks are welded to cylinder body.
Double acting, double rod
Bore x stroke 2" x 8"
PSI Max. 3,000
Rod Dia. 1.25"
Ports SAE 6
Retracted length 23" (measured from end of rod to end of rod)
Shpg. 22 lb.
Both Rod Ends Drilled and Tapped
Drilled 2-1/8" deep
Tapped 3/4"-16 x 1-5/8" deep
Wrench flats at rod ends
Cylinder Body Mount
Four bolt mount on 11.50" x 3.12" centers
Untapped mounting holes for 3/8" dia. socket head bolts
Can this be used to give an old 1 1/2 ton dump truck power steering
A: If your steering design calculations state that this will provide adequate force for that vehicle, possibly.
Date Submitted: 04/01/2018
How long will it be before this item ships if I buy it today?
A: We are currently out of stock, expecting a shipment in the second week of April 2018. It would not ship before then unless stock were to arrive early.
Date Submitted: 02/17/2018
DEAR SIRS WHAT IS THE TOTAL WIDTH OF ASSY WITH BOTH RODS EXTENED AD CLOSED
A: Total width is 23". This is from end to end on the rod. As you move the cylinder it will extend out one end and retract back at the other. Also check out the dimensional drawing on the this product.