1.9 cu in White Drive Products 125032JMBC4AAAAA Hydraulic Motor

Item Number: 9-8829-D

Price: $119.99
Back to top

1.9 cu in White Drive Products 125032JMBC4AAAAA Hydraulic Motor

1.9 cu in White Drive Products 125032JMBC4AAAAA Hydraulic Motor

item number: 9-8829-D PRICE: $119.99 1 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 9-8829-D
1.9 cu in White Drive Products 125032JMBC4AAAAA Hydraulic Motor
Item Number: 9-8829-D
Price: $119.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
New, WHITE DRIVE PRODUCTS hydraulic motor. Spool valve design intended for light-duty applications such as in the mobile, industrial, and agricultural markets.

  • Brand White Drive Products
  • Model 125032JMBC4AAAAA
  • Family WM
  • Displacement 1.9 cu. in. / rev.
  • Motor Type Gerotor
  • Rotation Reversible
  • Pressure:
       1450 PSI cont.
       2030 PSI int.
  • Torque:
       354 in-lbs. cont.
       487 in-lbs. int.
  • Speed:
       622 RPM cont.
       767 RPM int.
  • Flow:
       5 GPM cont.
       7 GPM int.
  • Mount Three-bolt round
  • Shaft 16mm dia. x 1-1/8" long, keyed, tapped M6 x 1.0
  • Ports 3/8" BSPP End Ports, Aligned
  • Case Drain None
  • Size 4.687" x 2.36" dia.
  • Shpg. 7 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 4

It this particular model motor interchangeable with your item # part 9-8369 that's discontinued? I'm looking for the ports to be the same at the very least. Thanks

A: It is not directly interchangeable. The mounting holes and shaft are metric and the ports are BSPP thread. Item 9-1157 is the closest to that motor, with 9-8630-B coming in a close second.

What is the pilot diameter and length. What is the bolt hole circle diameter. Do you have drawings for this motor (mounting dimensions etc.)

A: On page 18 of the linked document, the mounting for this series of motors is detailed. This motor in particular uses metric mounting holes. https://assets.danfoss.com/documents/DOC225386485237/DOC225386485237.pdf

what is the minimum rpm. I am looking for about 150 Rpm operating at a pressure of approx 500PSI

A: The minimum flow for continuous use is 0.8 gpm. For your stated rpm and pressure range you will need approximately 1.5 gpm.

If I mounted a sprocket on this motor, would it be able to serve with 150-200 pounds of chain pull?

A: The manufacturer's information states that if the force is applied the shaft at a distance of .79" from the mount face (approximately the middle of the key length) this series should tolerate up to 360 lbf of side load. This may not take shock loads from any other portion of the chain's load that could spike it above that.

Recently Viewed
Email a Friend
1.9 cu in White Drive Products 125032JMBC4AAAAA Hydraulic Motor
Item Number: 9-8829-D
Price: $119.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.9 cu in White Drive Products 125032JMBC4AAAAA Hydraulic Motor
Additional Comments:

Please wait...
Newsletter SignUp