5" Reservoir Sight Level Gauge w/Thermometer Zinga SG05ATG

Item Number: 9-7287-5

Price: $17.90
TOP
Back to top

5" Reservoir Sight Level Gauge w/Thermometer Zinga SG05ATG

5" Reservoir Sight Level Gauge w/Thermometer Zinga SG05ATG

item number: 9-7287-5 PRICE: $17.90 179 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 9-7287-5
5" Reservoir Sight Level Gauge w/Thermometer Zinga SG05ATG
Item Number: 9-7287-5
Price: $17.90
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 90 of our current catalog
Description
RESERVOIR SIGHT LEVEL GAUGE
Brand new, ZINGA series SG reservoir sight level gauge. Dual scale thermometer. Aluminum guard. For use with petroleum and water base hydraulic fluids.

Specifications
  • 5" mounting centers
  • 1/2"-13 UN bolts
  • Size 6-7/8" x 1-13/16" x 1-7/8"
  • Shpg. 1 lbs.


    Thermometer Range:
  • 30° F to 210° F
  • 0° C to 100° C


California
Residents
Prop 65 Warning WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

Ask A Question
Submit a question for this product

Showing Questions of 4

Is the viewing face glass or plastic?

A: The viewing face is plastic.

One answered question said back access was needed to tighten the nuts. If the wall was tapped for threads, or nuts welded inside tank, can the bolts turn from the outside, ie. Bolts turn in the gauge body, or pressed in? My question on the 3 inch said internal (back mounting) only, but the bolts appear like it could be front mounting. Please check one from stock and see if the bolts turn. Most sight gauges have the bolts loose to turn and can be front or back mounted.

A: If the appropriate threaded bungs were available, one could tighten the bolts in from the outside to mount it. The bolt sizes are listed on each item's page.

can the sight gage no. 9-7287-5 be mounted externally or do you need access to the interior of a hydraulic tank?

A: There are retaining nuts that would make internal access necessary.

for they gauge shown, the one I brought is overseas, they say it is leaking and need a gasket. Is it a gasket or orings that seal it to the tank?

A: There are flat flexible rubber washers on the bolts that seal the mounting. They are visible in the picture. It could be referred to as a gasket. It could easily be replaced by any flexible washer material if need be.

Recently Viewed
Email a Friend
5" Reservoir Sight Level Gauge w/Thermometer Zinga SG05ATG
Item Number: 9-7287-5
Price: $17.90
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

5" Reservoir Sight Level Gauge w/Thermometer Zinga SG05ATG
Additional Comments:

Please wait...
Newsletter SignUp