3" x 1-1/4" Shepherd Swivel Bolt Hole Caster 110463M

Item Number: 1-4753

Price: $1.95
Back to top

3" x 1-1/4" Shepherd Swivel Bolt Hole Caster 110463M

3" x 1-1/4" Shepherd Swivel Bolt Hole Caster 110463M

item number: 1-4753 PRICE: $1.95 295 In Stock Surplus Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 1-4753
3" x 1-1/4" Shepherd Swivel Bolt Hole Caster 110463M
Item Number: 1-4753
Price: $1.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 186 of our current catalog
New, SHEPHERD model# 110463M bolt hole caster with threadguards. Ball bearing in swivel head.

  • Wheel Diameter 3"
  • Wheel Width 1-1/4"
  • Load Capacity 250 lbs.
  • Mounting Height 4-1/8"
  • Brake None
  • Mount 1/2" dia. center hole, Offset
  • Wheel Tread Material Polyurethane
  • Wheel Tread Color Grey
  • Caster Wheel Core Material Polyolefin
  • Caster Wheel Bearing Ball
  • Shpg. 2 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 4

Are there casters suitable to use on car dollies? I made a set of dollies to move a 1977 IH Scout II vehicle. At 250 #s each, that would make a total of 4,000# capacity.

A: We have hundreds of casters. Please take into account: material, duty cycle, weight rating, operating surface, pivot room, and method of application as you determine what would would be best for you.

What type of bearing is in the wheel of this caster, not the swivel caster?

A: The wheel bearing is marked as 6202RS. It appears to be a sealed ball bearing.

What is the outside diameter of the metal mounting surface? The part of the mounting area that would sit flat against whatever the caster would be mounted to. I'm not asking about the inside hole that a bolt would go through to actually affix it to something, I see that is 1/2".

A: The o.d. of the surface that could contact is 1.875". The total o.d. is 2.25".

How does this caster mount? Will a hex head bolt go up through it from below?

A: It would require removing the wheel to insert the bolt depending on the bolt length, but that appears to be the intended mounting fashion.

Recently Viewed
Email a Friend
3" x 1-1/4" Shepherd Swivel Bolt Hole Caster 110463M
Item Number: 1-4753
Price: $1.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3" x 1-1/4" Shepherd Swivel Bolt Hole Caster 110463M
Additional Comments:

Please wait...
Newsletter SignUp