VARIABLE FREQUENCY 1PH/3PH TO 3PH AC MOTOR CONTROL
Brand new TECO model FM50-202-C. Variable frequency drive for controlling speed of a three phase motor from a single or 3 phase power
source. Keypad switches for Start/Stop and Speed control. Programmable acceleration and deceleration time, upper and lower
frequency. Also has terminals for external controls to reverse motor or use external potentiometer (not included) for speed
control. Internal cooling fan. Use with standard 3 phase induction motors.
Are parts and /or service available. I have two TECO vid that need repair
A: We do not have any parts and do no repair.
Date Submitted: 04/15/2018
does this have reverse function or is a separate switch needed ?
A: These do have a reverse operation function accessible from the menu.
Date Submitted: 12/19/2017
Is there a circuit connection to control on off? I'm currently using scr drives and I use a contactor which I know is nor recommended for vfd
A: There is not. The manual specifically states to not use a magnetic contactor to control ON and OFF for the drive.
Date Submitted: 12/07/2017
Is there an output to light an L.E.D. light indicating the drive is on at a remote location?
A: It does not appear that there is a dedicated output to supply a remote LED.
Date Submitted: 06/16/2017
Hi, I have bought a machine from Hong Kong that has a motor (220V, 3 phase, 50 Hertz, 7amp). The power in my shop is 240V single phase 60 Hertz. There are a few smaller motors and a heating element in the machine also. I am wondering what you would recommend for converting the power to get this thing running. I have been looking at item # 11-3425-2. Please let me know what you would recommend. Thanks,
A: Please refer to the owner's manual link in the lower right corner of this item's web page. I believe that these are capable of running multiple motors if the total current draw does not exceed the output of the controller.
Date Submitted: 12/01/2016
Can you use this to run two motors with one drive
A: From the user manual available for download from this item's web page:
"If the AC drive is used to drive more than one motor, the total capacity must be smaller than the capacity of the AC drive.
Additional thermal overload relays must be installed in front of each motor. Set Fn_18 at 1.0 times of the rated value
specified on the motor nameplate at 50Hz, 1.1 times of the rated value specified on the motor nameplate at 60Hz."
Date Submitted: 09/19/2016
Can this be used to power a single phase motor>
A: These are meant for controlling and reversing 3 phase motors.