1.8 RPM 115 Volt AC Gearmotor 2051788

Item Number: 5-1771

Price: $18.95
Back to top

1.8 RPM 115 Volt AC Gearmotor 2051788

1.8 RPM 115 Volt AC Gearmotor 2051788

item number: 5-1771 PRICE: $18.95 1963 In Stock Surplus Item

calculate shipping
Calculate Shipping for Item 5-1771
1.8 RPM 115 Volt AC Gearmotor 2051788
Item Number: 5-1771
Price: $18.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 155 of our current catalog

You may also consider:

New, SPG Co. model ISG-3220BXA(P/N 2051788) inline gearmotor. Ideal replacement corn pellet stove, auger motor. Originally used on Bixby stoves or use on other equipment. Aluminum gear housing. Four 8-32 UNC tapped bolt hole face mount on 2-3/8" x 2-3/8" centers. .

  • Speed 1.8 RPM
  • Voltage 115 AC
  • Amperage 0.4 Amps
  • Torque 110 in - lbs.
  • Rotation CW
  • Duty Intermittent(5 min)
  • Enclosure Open
  • Mount Face
  • Shaft 1/2" diam. x 1-3/4", 1/2-13 UNC RH threaded
  • Size 3-3/8" x 2-3/4" x 4-3/4"
  • Shpg. 5 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 9

Do you have the same motor with CCW rotation?

A: We do not, no.

Need to replace Country Flame auger motor PP535-1 manufactured by Multi Products Inc. I timed RPM It apears to be 1 1/4 RPM (1.25). OEM shaft is flat on one side. Will a gear that is secured with set screw work on threaded shaft. Will the RPM difference be a problem. Thank you, Jim Wojdylak

A: A flat could be ground into the threaded portion to make it more secure. We cannot say how the difference in rpm will change the performance or cause issues.

Im looking to make a motorized lazy susan that can handle 20-30 pounds and stumbled across this.. what do you sell, short of a timer, thay will automatically keep this thing turning on and off intermittent for it to cool down?

A: We do not sell anything that will run this motor on/off in a duty cycle that agrees with it's thermal/cooling needs.

I just bought one of these. Does it require a starting capacitor?

A: It does not.

I need a motor to run CCW. Can the polarity of this motor be changed? Alternatively, do you sell reversing gear sets that can mate with the output shaft and output CCW motion at the same RPM?

A: This is an AC motor, and as such the polarity cannot be changed. We do not have any gear sets that will reverse it.

I need the rpm, but not the torque. Can this be run at a lower voltage continuously and at about 1.8 rpm?

A: No this motor cannot be run on lower voltage. A shaded pole motor like this will about the same current whether loaded or not so it is strictly intermittent duty.

will this inner change with bixby part # 4000099

A: Sorry we don't have any interchange info. This item was Bixby part 2051788.


A: No it can only run for 5 minutes at a time and then requires the same amount of time or more to cool down.

Is the motor reversible by polarity, by reversing the connection to the feed wires, or can I unbolt the motor and turn around to make ccw ?

A: The only way to reverse the rotation is by unbolting the stator and changing it's orientation to the rotor. Because these are AC motors they are not polarity specific.

Recently Viewed

You may also consider:

Email a Friend
1.8 RPM 115 Volt AC Gearmotor 2051788
Item Number: 5-1771
Price: $18.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.8 RPM 115 Volt AC Gearmotor 2051788
Additional Comments:

Please wait...