60 RPM 220 Volt AC 1/30 HP Shaded Pole Gearmotor

Item Number: 5-1373

Price: $5.95
TOP
Back to top

60 RPM 220 Volt AC 1/30 HP Shaded Pole Gearmotor

60 RPM 220 Volt AC 1/30 HP Shaded Pole Gearmotor

item number: 5-1373 PRICE: $5.95 11 In Stock Surplus Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 5-1373
60 RPM 220 Volt AC 1/30 HP Shaded Pole Gearmotor
Item Number: 5-1373
Price: $5.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Description
60 RPM 220 VAC INLINE GEARMOTOR
New shaded pole gearmotor.

SPECIFICATIONS
  • 60 RPM
  • 220 VAC
  • Draws 0.18 Amps (no load)
  • 1/30 Hp (calculated)
  • 33 in-lb torque (calculated)
  • 63:1 gear ratio
  • CW rotation
  • Intermittent duty
  • Shaft: 3/8" dia. x 1" long with flat
  • Four-bolt face mount on 2-3/8" x 2-3/8" centers
  • Overall size 4-1/4" x 2-3/4" x 4-3/4"
  • Shpg 7 lb
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 6

Does turning each shaft manually turn the opposite shaft when no voltage is applied (in other words, can it be used as a manual gear reducer / increaser in both directions)?

A: No, this cannot be used as a manual gear reducer.

can it be wired to 120v

A: They cannot.

What is the diameter of the high speed shaft that sticks out the top

A: The diameter of the high speed shaft that protrudes from the back of the armature is .25"

Are these motors able to be set up and used as reversible?

A: You cannot electrically reverse them but turning the center winding stack end for end will cause the to run the opposite rotation. The plastic on the stack is not symetrical so this would not be done simply.

What are the intermittent duty ratings for this motor?

A: They suggest 1-3 minutes on, 5 minutes off. We do not have a cooling system for this.

Does the shaft turn in back at same time as main shaft in front?

A: Yes the shaft shaft out the motor turns whenever power is applied. There is no reduction on this shaft so it is much higher speed. Approximately 3750 RPM.

Recently Viewed
Email a Friend
60 RPM 220 Volt AC 1/30 HP Shaded Pole Gearmotor
Item Number: 5-1373
Price: $5.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

60 RPM 220 Volt AC 1/30 HP Shaded Pole Gearmotor
Additional Comments:

Please wait...
Newsletter SignUp