743 RPM 115 Volt AC Inline Gearmotor

Item Number: 5-1647

Price: $29.99
Back to top

743 RPM 115 Volt AC Inline Gearmotor

743 RPM 115 Volt AC Inline Gearmotor

item number: 5-1647 PRICE: $29.99 186 In Stock Surplus Item

Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 5-1647
743 RPM 115 Volt AC Inline Gearmotor
Item Number: 5-1647
Price: $29.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 153 of our current catalog
Used, Bodine Electric, inline gearmotor. Includes run and start capacitors. Requires relay (not included) for start capacitor.

  • Speed 743 RPM
  • Voltage 115 AC
  • Amperage 9.9 Amps
  • Power 440 Watts
  • Torque 44 in - lbs.
  • Gear Ratio 2.42:1
  • Rotation CW
  • Duty Continuous
  • Enclosure Open
  • Mount Face 3-5/8" x 3-5/8"
  • Shaft 16MM x 3-1/2" w/keyway
  • Size 5-1/2" x 10-1/2" x 5-1/2"
  • Shpg. 36 lbs.
More Specs


Click to view...

Click on boxes below for more information about this product.
Wiring DiagramMore Specs
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 11

can I hook up to a controller and make this a variable speed motor? Thanks

A: No this is not a variable speed motor.

What are the dimensions of the keyway?

A: 5 MM

What is the length of the motor without the parallel gearbox and what diameter is the motor shaft driving the parallel gearbox?

A: These are not manufactured to be separated. We have none of that information.

Is the 10-1/2" length listed inclusive of the shaft length or is it just the motor body?

A: That dimension is only the motor body. The shaft length is in addition to the stated motor length.

What is the horsepower rating of this unit?

A: The motor data plate states the motor output as: 440 W (0.59 Hp), 743 rpm, with 5.0 Newton-meters (3.69 ft/lbs) of torque.

What is the Bodine motor model number of this motor.

A: The only number resembling a Model number is: Type 48C8BVDY-Y2.

what size is the mounting holes ?

A: The mounting holes on the flange are threaded M8-1.25.

cw rotation is stated, viewed from which end of motor? Thanks..

A: Shaft rotation listed is when looking directly at the end of the shaft.

What type of relay?Please recommend!

A: This requires a current type relay to put the start capacitor into the circuit just momentarily. Sorry no information as to what rating is needed.

Could you recommend a low cost motor speed control unit for this gearmotor? I'd like to get the final output speed down to 150~500 rpm.

A: Sorry we don't have any speed controls that would work for this. Make sure anything you search for is compatible with a capacitor start/capacitor run motor.

743 rpm is this before or after reduction?

A: The 743 RPM is the output shaft speed. The motor itself is 1800 RPM.

Recently Viewed
Email a Friend
743 RPM 115 Volt AC Inline Gearmotor
Item Number: 5-1647
Price: $29.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

743 RPM 115 Volt AC Inline Gearmotor
Additional Comments:

Please wait...
Newsletter SignUp