80 RPM 115 Volt AC Brevel Gearmotor

Item Number: 5-1572

Price: $8.95
Back to top

80 RPM 115 Volt AC Brevel Gearmotor

80 RPM 115 Volt AC Brevel Gearmotor

item number: 5-1572 PRICE: $8.95 114 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 5-1572
80 RPM 115 Volt AC Brevel Gearmotor
Item Number: 5-1572
Price: $8.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 155 of our current catalog
New BREVEL. Inline parallel shaft gearmotor, model Y.

  • RPM 80
  • Voltage 115 VAC
  • Amps 2 (no load)
  • Rotation CW
  • Duty Intermittent 
  • 4 hole face mount 1-9/16" x 1-1/4" centers
  • Shaft 3/8" diam. x 3/4" w/ flat
  • Overall Size 3-1/8" x 2-1/2" x 4-3/8"
  • Shpg. 4 lbs.
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 9

does this motor require a starter? or just wire direct?

A: This gearmotor is wired direct.

Is this motor variable speed? Can you suggest a potentiometer / speed control product to work with it?

A: This is not a variable speed motor.

Sorry didn't notice my question had already been answered. But if it can run for 2 min how long does it need to rest between runnings? Thanks again!

A: We have no data to determine what the thermal limits are on the motor and cannot accurately advise of the duty cycle. Without an exhaustive testing process to see how long the motor will tolerate operation before failure we simply cannot say.

What is the shaft length?

A: The shaft length is 3/4" long; 3/8" diameter, with a flat.

Input shaft is extended. Could addition of a fan on shaft increase duty cycle?

A: Yes. The degree it would help is unknown, but any air flow will be beneficial.

Can the coil be reversed to run CCW

A: Yes.

Do you have this motor in a G model?

A: We do not, no.

What is the torque?

A: Sorry we don't have a torque spec for this motor. It is powerful for it's size but only rated for intermittent duty.

What is the duty cycle for running this motor?

A: Would be under 2 minutes of on time.

Recently Viewed
Email a Friend
80 RPM 115 Volt AC Brevel Gearmotor
Item Number: 5-1572
Price: $8.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

80 RPM 115 Volt AC Brevel Gearmotor
Additional Comments:

Please wait...
Newsletter SignUp