1.6 RPM 12 VDC GEARMOTOR

Item Number: 5-1741

Price: $19.95
TOP
Back to top

1.6 RPM 12 VDC GEARMOTOR

1.6 RPM 12 VDC GEARMOTOR

item number: 5-1741 PRICE: $19.95 253 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 5-1741
1.6 RPM 12 VDC GEARMOTOR
Item Number: 5-1741
Price: $19.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 161 of our current catalog
Description
1.6 RPM 12 VDC INLINE GEARMOTOR
New, RP2020 inline gearmotor. Ideal replacement corn pellet stove, auger motor. Aluminum gear housing. Six 10-32 bolt hole face mount on 1-15/16" - 4-3/8" x 2-3/8" centers.

SPECIFICATIONS
  • Speed 1.6 RPM
  • Voltage 12 DC
  • Amperage 350 mA
  • Torque 78 in - lbs.
  • Rotation Reversible
  • Duty Continuous
  • Enclosure Open
  • Mount Face
  • Shaft 3/8" diam. x 1" w/flat
  • Size 3-3/4" x 2-3/4" x 4-3/4"
  • Shpg. 3 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 6

Are motor brushes replaceable in this unit, possibly through what appears to be an opening in the motor case near to the spade connection end? If so, there should be another slot on the other side not shown. If I use a reversible dc brushed motor, I would want to be able to replace the brushes if needed. Thank you.

A: The brushes are not accessible via the case vents. It does not appear they intended the brushes to be serviceable.

Hello, Is there a technical data sheet available for this product? With Torque-speed curves, efficiency data, etc.?

A: We do not have that information for this item.

I see that it is reversible, second, will it handle a rheostat?

A: We have no information regarding it's compatibility with that form of control.

Hi I want to buy this unit and was wondering if the drive shaft can be mounted on the back side of the gear,1.6 RPM 12 VDC GEARMOTOR ITEM NUMBER: 5-1741 Also what power supply would work well with this? Thanks

A: It doesn't appear the shaft can be reversed in the gear case due to the alignment of the gears. It appears that any of the 12VDC power supplies we have would be adequate to power this motor.

The motor I have is 12v, 8w ,2 rpm . Could I buy the 1.6 watt? Even if I had to put the motor on my gear box. Would that work. I can't get parts for my pellet stove

A: This motor is 1.6 RPM wattage is 4.2. This motor may or may not fit on a different gearbox, but would be worth a try if no parts can be found for yours.

what is the distance from motor shaft center to the outside case of the motor?

A: From the center of shaft to top of the case is 1-3/8".

Recently Viewed
There are no recently viewed products.
Email a Friend
1.6 RPM 12 VDC GEARMOTOR
Item Number: 5-1741
Price: $19.95
Message for your friend:

I found this on the Surplus Center website, http://www.surpluscenter.com. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.6 RPM 12 VDC GEARMOTOR
Additional Comments:

Please wait...