28 Volt DC 6000 Pound Bomb Hoist Gearmotor

Item Number: 3-1034

Price: $49.99
Back to top

28 Volt DC 6000 Pound Bomb Hoist Gearmotor

28 Volt DC 6000 Pound Bomb Hoist Gearmotor

item number: 3-1034 PRICE: $49.99 7 In Stock Surplus Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 3-1034
28 Volt DC 6000 Pound Bomb Hoist Gearmotor
Item Number: 3-1034
Price: $49.99
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
Take-offs, old inventory. Military surplus bomb hoist gearmotor, NSN# 1730-203-8712. Furnished with manual operation handle and snatch block with sprocket.
Item is old military surplus and will have scratched paint and some corrosion and dents.  See the photos for a representation of the items.  A wiring diagram is not available for this item.  Item is sold as is.

WARNING:  This product was built for multi-purpose hauling and pulling operations. It is not to be used as a hoist for lifting, supporting or transporting people or for handling loads over areas where people could be present!

  • Gearmotor 22-1/8" x 7" x 9"
  • Shpg. Weight 75 lbs.
Information From Tags On Gearmotor
Tag #1 Tag #2
Electric Bomb Hoist
Type K-4
CAP. 6,000 lb.
DWG No. SWV-54-520
Order No. AF33(602)7109
Steel Products Engry. Div.
Kelsey-Hayes Wheel Co.
Springfield, Ohio
Serial No. 402
U.S. Property
Steel Products Engineering Div.
Kelsey-Hayes Wheel Co.
Bomb Hoist Motor
Order AF33(602)7109
Model SP5400
Duty Int.
RPM 8,000
HP 1.1
Serial No. 406
Property U.S. Gov't
Volts 28
Amps 44
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.

We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.

Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.

NOTE! Warranties do not cover bent hydraulic cylinder shafts.

We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.

Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)

In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.

Ask A Question
Submit a question for this product

Showing Questions of 8

Is the outer case material aluminum or cast iron?

A: Most of the outer case is aluminum, the gear box, bolts, motor are all steel.

I'm just wondering if there is any chain included with this hoist and if so what the length is?

A: No chain is included with this hoist. It is made to work with 100 pitch standard roller chain.

Has anyone figured out the wiring for this yet?

A: We have not been provided with any detail on the wiring by customers, nor have we found any diagrams.

THe motor has (5) pin connector- how you wire the motor?

A: A wiring diagram is not available for this item.

The speed states 8000 rpm, is that the motor rpm? If so, what's the final output rpm on the chain end?

A: The motor speed is stated as 8000 rpm. We have not disassembled one to calculate the gear ratios. It appears that it has at least three stages of reduction to the final, but we do not know what the final drive rpm is.

1. Will this run on 24V ? 2. What size chain does it use?

A: Yes, it will run fine on 24 Volt DC power. It is 100 pitch chain.

Another one: Please tell me how your standard warranty policy will work on this "as is" item. If it doesn't work, you will replace it, correct? Who pays for freight (4/5 the item cost)?

A: This would have our standard 90 day Surplus Center warranty.

It looks like this hoist uses chain instead of cable. Can someone please tell me the chain number/size?

A: It uses 100 pitch chain.

Recently Viewed
Email a Friend
28 Volt DC 6000 Pound Bomb Hoist Gearmotor
Item Number: 3-1034
Price: $49.99
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

28 Volt DC 6000 Pound Bomb Hoist Gearmotor
Additional Comments:

Please wait...
Newsletter SignUp