500 RPM 12 Volt DC Right Angle Gearmotor

Item Number: 5-1816

Price: $15.95
TOP
Back to top

500 RPM 12 Volt DC Right Angle Gearmotor

500 RPM 12 Volt DC Right Angle Gearmotor

item number: 5-1816 PRICE: $15.95 256 In Stock Surplus Item


calculate shipping
Calculate Shipping for Item 5-1816
500 RPM 12 Volt DC Right Angle Gearmotor
Item Number: 5-1816
Price: $15.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 160 of our current catalog
Description
500 RPM 12 VDC GEARMOTOR
New, permanent magnet, right angle, worm gear reduction gearmotor. Built for seat back adjustment in vehicles. Cast aluminum gear housing with steel motor frame. Hollow square thru-drive output shaft. Two bolt rubber isolation mount. Two pin male integral Packard power connection.

SPECIFICATIONS
  • Speed 500 RPM no load
  • Speed 220 RPM at rated torque
  • Voltage 12 DC
  • Amperage 22 Amps at rated torque
  • Torque 16 in-lbs
  • Rotation Reversible
  • Duty Intermittent
  • Enclosure TENV
  • Mount 3/8" dia. two bolt on 2.2"centers
  • Hollow Thru-shaft 5/32" (4 mm)
  • Size 5-1/2" x 3-1/8" x 2-1/2"
  • Shpg. 3 lbs.
Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 7

Are there more specifications about the motor power connection. Im looking for cable to connect to the motor. Any suggestions?

A: There are not. This was an OEM piece for an automotive use and no further information is available.

Seeking a BRUSHLESS motor with the same specifications as this BRUSH 12Volt DC right angle gearmotor 5-1816 : https://www.surpluscenter.com/Electric-Motors/DC-Gearmotors/DC-Gearmotors/500-RPM-12-Volt-DC-Right-Angle-Gearmotor-5-1816.axd Please advise

A: We do not have such an item.

If starting AMP'S IS 22 WHAT ARE RUNNING AMPS UNDER A LOAD I AM LOOKING FOR A MOTOR TO PUT ON A CRAB POT PULLER. AND i WOULD LIKE A MOTOR MAYBE 1/2 HP. AND 250 rpm do you guys have anything

A: This motor pulls 22 amps while operated at rated torque-under load. This motor was originally part of a vehicle seat adjustment system. It is nowhere near what would be needed for your application. The only way to get close with what we currently have would be plugging a face-mount motor into a right angle reduction gearbox.

Do you sell a suitable 12VDC for this motor?

A: We do not have a power supply that will run this at rated full torque.

Looking for at least 1/2 hp 12 v dc to makes capstan Do you have anything like this

A: We do not have any gearmotors that size rated for continuous duty. The closest thing is our item 10-2572 which could be paired with a reduction gearbox to get a continuous duty reduced output.

Is there a spec sheet with drawn dimensions on this motor, or even a .stp, solidworks, or some other type of CAD file available for this motor?

A: Sorry we have no documentation on this item.

Does this motor actually pull 22 Amps loaded and 16 in-lb of torque?? I like these motors, I have some exactly like this one, externally, that pull 5 Amps +/- at load.

A: The 22 amp rating would be at a torque output great enough to stall the motor. Under normal loading it should require about the same amperage as the motors you have currently.

Recently Viewed
Email a Friend
500 RPM 12 Volt DC Right Angle Gearmotor
Item Number: 5-1816
Price: $15.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

500 RPM 12 Volt DC Right Angle Gearmotor
Additional Comments:

Please wait...
Newsletter SignUp