9 RPM 90 Volt DC Gearmotor Leeson M1115025

Item Number: 5-1804

Price: $595.00
Back to top

9 RPM 90 Volt DC Gearmotor Leeson M1115025

9 RPM 90 Volt DC Gearmotor Leeson M1115025

item number: 5-1804 PRICE: $595.00 5 In Stock Regular Stock Item

Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 5-1804
9 RPM 90 Volt DC Gearmotor Leeson M1115025
Item Number: 5-1804
Price: $595.00
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 157 of our current catalog
Brand new, LEESON M1115025 inline gearmotor. Use with speed controller (not included) to have variable speed with 115 VAC input.

  • Speed 9 RPM
  • Voltage 90 VDC
  • Amperage 0.5 Amps
  • Power 1/20 Hp
  • Torque 268 in.lbs.
  • Gear Ratio 216:1
  • Overhung load 474 lbs.
  • Rotation Reversible
  • Duty Continuous
  • Enclosure TEFC
  • Face Mount 4 bolt, 3.375" square
  • Base Mount
  • Shaft 5/8" dia. x 1", 3/16" keyway
  • Size 4.06" x 8.57" x 5.13"
  • Shpg. 12 lbs.
More Specs
Click on boxes below for more information about this product.
Dimensional DiagramMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 6

What is minimum and maximum RPM?

A: That would be determined by the settings of the speed controller used. Maximum rpm should be 9 rpm.

Do I need a heat sink item# 11-2269h with speed control item# 11-2269. The gear motor that I am going to use is # 5-1804

A: No, the heatsink is only required when the current output is over 5 amps. This motor draws 0.5 amps.

Do you have to have a heat sink with this motor, or just the scr speed controller only.

A: This is a small enough motor that no heat sink is required with any of the drives we have.

Would you sell replacement brushes for the motor of product number 5-1804 and if so can you give me a part number and price?

A: We do not sell the replacement brushes, no.

which speed controller would I use with this motor?

A: We have a few different controllers that would work with this, See items 11-2269, 11-2102, 11-3304 and 11-3304-R.

Will a 25 amp SCR with 120 ACV input work for this motor?

A: The voltage should still be reduced as the motor is rated for 90 Volts DC. Usually this type of motor is used with a variable speed control that is powered from 115 Volt AC.

Recently Viewed
Email a Friend
9 RPM 90 Volt DC Gearmotor Leeson M1115025
Item Number: 5-1804
Price: $595.00
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

9 RPM 90 Volt DC Gearmotor Leeson M1115025
Additional Comments:

Please wait...
Newsletter SignUp