Can these series of TENV DC motors be run with shaft vertical?
A: Yes this can be mounted vertically.
Date Submitted: 01/14/2020
will the motor bolt up to item number 13-175-50-L-56C or equivalent 56C style C face gearboxes?
Date Submitted: 09/08/2018
can you show the wiring diagram for forward and reverse ? Do you sell a variable speed controller for this motor? If so how much is that? Do you sell a open close open switch for forward and reverse?
A: This is a permanent magnet DC motor. The motor has two wires. Providing polarity one way (positive to red, negative to black) will result in one direction. Reversing polarity (negative to red, positive to black) will result in the other direction. We do not have any speed controls for 12 VDC motors. At the current draw this motor pulls, item 11-3334 would operate the motor in either direction.
Date Submitted: 04/04/2018
I need a momentary up and down switch, as in a up and down control . A winch control? Do you have anything available?
A: Our item 11-3492 may work in that application.
Date Submitted: 01/16/2018
Can this DC motor be converted into a Ac generator?
A: No. Permanent-magnet DC motors generate DC voltage and current.
Date Submitted: 12/04/2017
Will this handle a load ?
A: This will handle a load appropriate to the power output of the motor.
Date Submitted: 08/25/2017
I am looking for an 1800 rpm dc motor to run a wringer washer off a 12 volt battery bank. What is the voltage range? Would I require any regulators or controllers? Right now all i do is plug in my AC motor and it runs it without any regulation. The washing machine regulates itself mechanically with a clutch and drive shaft.
A: This motor can be directly connected to a 12 volt battery and will run 1800 RPM. No controls are necessary. You should use a relay for switching the motor on and off.
Date Submitted: 12/02/2015
I need to utilize this motor with forward and reverse and with variable speed control. What other items in your catalog are necessary to make this happen?
A: You would need a reversing relay such as item 11-3169-12. This is used with a toggle switch to start/stop/reverse the motor. Sorry we don't have anything for the variable speed control.