2 HP 1800 RPM 115/230 Volt AC 145TC TEFC Leeson Motor w/Manual Overload 121465.00

Item Number: 10-2708

Price: $352.00
TOP
Back to top

2 HP 1800 RPM 115/230 Volt AC 145TC TEFC Leeson Motor w/Manual Overload 121465.00

2 HP 1800 RPM 115/230 Volt AC 145TC TEFC Leeson Motor w/Manual Overload 121465.00

item number: 10-2708 PRICE: $352.00 19 In Stock Regular Stock Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 10-2708
2 HP 1800 RPM 115/230 Volt AC 145TC TEFC Leeson Motor w/Manual Overload 121465.00
Item Number: 10-2708
Price: $352.00
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 149 of our current catalog

You may also consider:

Description
2 HP 1800 RPM 115/208-230 VAC 145TC FACE AND BASE MOUNT MOTOR

Brand new, LEESON model P145K17FK10 E general purpose electric motor. Capacitor start and run. Steel housing. Thermal overload protection with manual reset. Made in the USA.

SPECIFICATIONS
  • Catalog Number 121465
  • Power 2 HP
  • Voltage 115/230 AC
  • Amperage 18.4/9.2 Amps
  • Speed 1800 RPM
  • Rotation Reversible
  • Phase 1
  • Service Factor 1.0
  • Bearings Ball
  • Enclosure TEFC
  • Duty Continuous
  • Frame 145TC
  • Face Mount
      Four 3/8"-16 tapped holes on
      5-7/8" diameter bolt circle
  • Rigid Base Mount
      Six 0.34" diam. holes on 5-1/2" x   4" to 5" centers
  • Shaft 7/8" diam. x 2-1/8" w/ 3/16"   keyway
  • Size 11.62" x 8.89" x 8.58"
  • Shpg. 44 lbs.
Ask A Question
Submit a question for this product

Showing Questions of 7

Is this a C faced motor?

A: Yes.

do you have a brake that will attach to this motor

A: No we do not have a brake for this motor.

Is this motor suitable for a lathe that had similar spec motor?

A: As long as the specifications are matching it should be adequate.

Just burnt my motor out on a Jet JWBS-14CS Bandsaw.. I was hoping if you could tell me if this motor would mount on that saw.

A: We have no cross reference information, nor can we find any specific information via the manufacturer to state suitability.

Can this motor be run vertically with the shaft down?

A: Yes, they can be.

This motor is synchronous or asynchronous .. how many poles is it?

A: According to the manufacturer literature, this motor has a synchronous RPM of 1800, with 4 poles.

I am using a gear pump with this motor that says clockwise rotation, does that mean the motor should be wired in reverse to go counter clockwise since they are face to face?

A: Yes, if a pump and motor are running with the shafts facing each other, and the pump is called out as CW facing the shaft, the motor should be CCW as facing the shaft.

Recently Viewed

You may also consider:

Email a Friend
2 HP 1800 RPM 115/230 Volt AC 145TC TEFC Leeson Motor w/Manual Overload 121465.00
Item Number: 10-2708
Price: $352.00
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

2 HP 1800 RPM 115/230 Volt AC 145TC TEFC Leeson Motor w/Manual Overload 121465.00
Additional Comments:

Please wait...
Newsletter SignUp