2.75 HP TREADMILL MOTOR
New, Leili model# L-295727 permanent magnet motor with brushes. Built for use in treadmills, ideal for use with speed controller (sold separately). Would also make excellent DC generator. Rated for 3.75 HP treadmill duty or 2.0 HP (1492 W) continuous duty. Internal, normally closed bimetallic switch signals thermal overload. Two 1/4"-20 threaded holes in motor housing for self-tapping screws.
Motor housing diameter measures 82mm (3.228"). Removable, heavy (4.2 lb.) steel flywheel threaded onto motor shaft measures 162mm (6.378") dia. x 36mm thick. Flywheel has 33mm O.D. ten-groove pulley for serpentine belt, doubles as cooling fan.
Power 2.75 HP Treadmill
2.0 HP (1492 W) Continuous
Voltage 130 VDC Treadmill
100 VDC Continuous
Amperage 15.8 Amps Treadmill
14.9 Amps Continuous
Speed 8705 RPM @ 130 VDC, No Load
6435 RPM @ 100 VDC, No Load
Mount Two 1/4"-20 Threaded Holes in Housing on 2-3/8" Centers
Shaft 17mm dia. x 43mm overall length w/ 1/2"-13 x 5/8" long LH threaded end
Rear Shaft 10mm dia. x 17.5mm overall length, stepped down to 7.5mm for 6.5mm