3 HP 4725 RPM 130 Volt DC Icon Health And Fitness Treadmill Motor M-326338

Item Number: 10-3031

Price: $79.95
TOP
Back to top

3 HP 4725 RPM 130 Volt DC Icon Health And Fitness Treadmill Motor M-326338

3 HP 4725 RPM 130 Volt DC Icon Health And Fitness Treadmill Motor M-326338

item number: 10-3031 PRICE: $79.95 573 In Stock Surplus Item



Available for curbside pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 10-3031
3 HP 4725 RPM 130 Volt DC Icon Health And Fitness Treadmill Motor M-326338
Item Number: 10-3031
Price: $79.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 164 of our current catalog
Description

3 HP 4725 RPM TREADMILL MOTOR
New, Icon Health and Fitness model# M-326338 permanent magnet motor with brushes. Built for use in treadmills, ideal for use with speed controller. Would also make an excellent DC generator. Rated for 3 HP (2238 W) continuous duty. Internal, normally-closed bimetallic switch signals thermal overload.

Motor housing diameter measures 115mm (4.527"). Removable, heavy (7.8 lb.) steel flywheel mounted onto tapered motor shaft by means of retention screw. Flywheel measures 172mm (6.772") dia. x 36mm thick. Flywheel has 31mm O.D. ten-groove pulley for serpentine belt.

SPECIFICATIONS

  • Power 3 HP (2238 W)
  • Voltage 130 VDC
  • Amperage 17.2 Amps
  • RPM 4725 RPM @ 130 VDC, No Load
  • Rotation Reversible
  • Enclosure OFC
  • Duty Treadmill
  • Mount Two 5/16"-18 threaded holes in housing on 3" centers
  • Shaft 17mm dia. x 35mm overall length, Tapers from 17mm to 16mm in 24mm, End tapped 3/8"-16
  • Size 11-1/8" x 6-3/4" O.D.
  • Shpg. 28 lbs.

Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 8

What is the distance from the flywheel end of the motor casing to the center of the first mounting hole?

A: From the front of the flywheel to the first mounting hole is 3-3/8".

Do you have an M-316708 used on C800 NordicTrack

A: We do not have a motor with that number, no.

do you know if this is compatible with the 318100 treadmill motor? I am replacing a motor in the nordictrack c900i. Thanks.

A: We have no information regarding the models these were used on or the part numbers it will replace.

Does this item have a fan? Thank you

A: Yes.

Hi, Could you ship this to Australia ? If possible, Melbourne would be the destination. Thanks

A: Please contact our Customer Service department with your order and shipping information, and they can get a quote worked up for you.

Can you explain what the four wires are for? Only two (red and black) would be needed for the brushes.

A: The main power leads are the red and black wires. The blue wires led to the treadmill board to transmit speed information. They do not need to be hooked up for proper operation.

Can you sell this motor without the flywheel. I do not want it

A: We do not sell this unit without the flywheel.

I'm trying to convert my Grizzly Knee mill into a variable speed mill. I didn't know which DC motor and controller would work best. It takes a 2 HP motor at 220v now. can you help me?

A: The largest DC motor we have rated for continuous duty that we have a controller for is 10-2578. Either of the 90 VDC controllers should operate that motor as long as the heatsink is used in conjunction with it. We do not have controllers that will operate the higher horsepower motors.

Recently Viewed
Email a Friend
3 HP 4725 RPM 130 Volt DC Icon Health And Fitness Treadmill Motor M-326338
Item Number: 10-3031
Price: $79.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

3 HP 4725 RPM 130 Volt DC Icon Health And Fitness Treadmill Motor M-326338
Additional Comments:

Please wait...
Newsletter SignUp