4.25 HP 5195 RPM 130 Volt DC Leili Treadmill Motor L-315219

Item Number: 10-3070

Price: $94.95
TOP
Back to top

4.25 HP 5195 RPM 130 Volt DC Leili Treadmill Motor L-315219

4.25 HP 5195 RPM 130 Volt DC Leili Treadmill Motor L-315219

item number: 10-3070 PRICE: $94.95 208 In Stock Surplus Item



Available for in store pickup in our Lincoln, NE location
calculate shipping
Calculate Shipping for Item 10-3070
4.25 HP 5195 RPM 130 Volt DC Leili Treadmill Motor L-315219
Item Number: 10-3070
Price: $94.95
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 162 of our current catalog
Description

4.25 HP TREADMILL MOTOR
New, Leili model# L-315219 permanent magnet motor with brushes. Built for use in treadmills, ideal for use with speed controller. Would also make excellent DC generator. Rated for 4.25 HP treadmill duty or 4.25 HP (3170 W) continuous duty. Internal, normally closed bimetallic switch signals thermal overload. Two 5/16"-18 threaded holes in motor housing for self-tapping screws.

Motor housing diameter measures 115mm (4.527"). Removable, heavy (7.8 lb.) steel flywheel mounted onto motor shaft by means of keyway and retention screw. Flywheel measures 172mm (6.772") dia. x 36mm thick. Flywheel has 31mm O.D. ten-groove pulley for serpentine belt.

SPECIFICATIONS

  • Power 4.25 HP (3170 W)
  • Voltage 130 VDC
  • Amperage 24.4 Amps
  • Speed 5195 RPM @ 130 VDC, No Load
  • Rotation Reversible
  • Enclosure OFC
  • Duty Treadmill
  • Mount Two 5/16"-18 Threaded Holes in Housing on 3" Centers
  • Shaft 17mm dia. x 42mm overall length, stepped down to 14mm dia. with 5mm keyway, End tapped 10-32
  • Size 12-1/4" x 6-3/4" O.D.
  • Shpg. 33 lbs.

Warranty
90 Day Surplus Center WarrantyView Warranty
Warranty Information

Products we regularly stock that are purchased directly from the manufacturer are covered by that manufacturers warranty.


We warrant all other products, only to the original purchaser, to be free from defects in materials and workmanship for a period of 90 days from date of shipment.


Because we have no assurance of the purposes for which any of the items herein will or may be used, no warranty is given as to the fitness of the item for any particular purpose. You have the responsibility for determining the suitability of items herein for your particular use. We shall not be liable for incidental or consequential damages.


NOTE! Warranties do not cover bent hydraulic cylinder shafts.


We shall, at our option, repair or replace any items deemed by us to be defective under this warranty. Items returned by the purchaser for warranty adjustment must be handled as stated in our return policy. Proof of, and date of purchase will be required.


Remedies under this warranty shall be limited to the original purchase price of the claimed defective item. (Some states do not allow limitations on implied warranties, incidental or consequential damages, thus, some of the limitations or exclusions referred to above may not apply to you.)


In no event shall we be liable for any damages, or warrant any of our products which are made defective as a result of damage in shipment, user's abuse, neglect or improper operation.



Ask A Question
Submit a question for this product

Showing Questions of 11

L-315219 motor: Do you have a wiring diagram?

A: No we do not have a wiring diagram for this motor.

I need that motor with external fan 13-15

A: We do not have this motor with that external fan.

What is the external fan number? I need 50-14. All the other numbers match the motor I have but I couldn’t find this one.

A: The external fan number is 45-14.

The motor I need matches all the numbers on this label except for the external fan number. Do you know if this will make a difference in installation or power draw?

A: We have no information about any differences there may be.

Referring to model # 10-3070. does this motor require a start/run capacitor? if yes, what are the specs for such a capacitor ie. voltage, uf, % of variability. Thank you.

A: This is a permanent magnet DC motor and does not require a capacitor.

Buen día. Tendrán nuevamente en algunos días el modelo L- 318100 Gracias de antemano

A: Lo sentimos, pero estos motores son artículos excedentes y cuando se agotan no tenemos una fuente para más. Es posible que nunca volvamos a ver ese modelo.

If model number is the same and everything else is same except the external fan would that make a difference. Mine is 42-15 and this is 45-14. Is that the size or what does that stand for. Thank You

A: We have no model coding information to state what any differences may be.

Hi there, Do I ever need to grease any part of this motor. (L-315219) Thanks. Joe

A: Typically these are in a position which makes them not serviceable, so no maintenance schedule is stated or given. To our knowledge they utilize sealed ball bearing and no zircs are used.

Will this replace the d-315219

A: We have no cross reference or application-specific information available regarding what units this was used on, or what it could replace.

I am trying to replace a Nordic Track treadmill motor Leili Motor L-355197. Will Model L315219 motor fit in the housing of the Nordic Track treadmill

A: We have no information about the dimensional interchangeability to any manufacturer's model.

Are these motors brand new surplus from the Leili factory, or are they refurbished motors from Icon warranty service that may have seen previous use?

A: To our knowledge these are brand new surplus motors that have not been installed.

Recently Viewed
Email a Friend
4.25 HP 5195 RPM 130 Volt DC Leili Treadmill Motor L-315219
Item Number: 10-3070
Price: $94.95
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

4.25 HP 5195 RPM 130 Volt DC Leili Treadmill Motor L-315219
Additional Comments:

Please wait...
Newsletter SignUp