1.97" Stroke 110 lbs 12 Volt DC Linear Actuator

Item Number: 5-1845-2

Price: $91.85
TOP
Back to top

1.97" Stroke 110 lbs 12 Volt DC Linear Actuator

1.97" Stroke 110 lbs 12 Volt DC Linear Actuator

item number: 5-1845-2 PRICE: $91.85 34 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 5-1845-2
1.97" Stroke 110 lbs 12 Volt DC Linear Actuator
Item Number: 5-1845-2
Price: $91.85
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 162 of our current catalog
Description
12 VDC 110 LB. LINEAR ACTUATOR
Brand new, GLIDEFORCE model LACT-2 light duty linear actuator. Simple two wire hookup. Metal housing is water resistant and sealed against dust. Permanent magnet motor. Non-adjustable limit switches at end of stroke both directions.

SPECIFICATIONS
  • Stroke 50 mm (1.97")
  • Voltage 12 DC
  • Push/Pull Rating
      Dynamic 110 lbs. max
  • Extension Speed
      No Load 0.57 in/sec
      Max Load 0.48 in/sec
  • Amps
      No Load 1.2
      Full Load 3.2
  • Gear Ratio  20:1
  • Duty 25%
  • Operational Temperature Range
       -14° F to +149° F
  • Enclosure IP65
  • Pin Holes 1/4"
  • Retracted Length 6.22"
  • Shaft Dia. 20 mm (0.787")
  • Size 6-7/8" x 1-11/16" x 3-1/4"
  • Shpg. 5 lbs.
More Specs
Click on boxes below for more information about this product.
Wiring DiagramMore SpecsAdditional InformationMore Specs
Ask A Question
Submit a question for this product

Showing Questions of 4

buen dia, quisiera implementar este dispositivo en mis proyectos. ustedes son fabricantes de este material? favor de ponerse en contacto con mi persona. saludos

A: No somos los fabricantes de este artículo, pero este es un artículo que podemos reordenar y obtener más.

Do you have any information on how much load this unit will handle in a static state?

A: The static load rating is 500 lbs.

1. Is the motor isolated ground type? 2. Cam I use a PWM to slow the stroke down? 3. How long does it take to complete a full stroke now? 4. Can I use a cycle timer 3sec - 6sec to stop mid stroke?

A: Yes, this is an isolated ground. The speed can be controlled easily with a PWM control. Speed varies with load, unloaded the travel speed is 0.59 in/sec and loaded it slows down to 0.39 in/sec. You could use a timer to stop it mid-stroke. The 5-1577-2 has a built in potentiometer to use with the 5-1577-C controller. This lets you employ 2 preset point the actuator will run to with a simple push of a button. It does not have a speed control in it.

what is the max extended length of this actuator?

A: It will be 8.21" from center of pin hole at base end to center of pin hole at moving end.

Recently Viewed
Email a Friend
1.97" Stroke 110 lbs 12 Volt DC Linear Actuator
Item Number: 5-1845-2
Price: $91.85
Message for your friend:

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

1.97" Stroke 110 lbs 12 Volt DC Linear Actuator
Additional Comments:

Please wait...
Newsletter SignUp