11.34" Stroke 1000 lbs 12 Volt DC Linear Actuator GlideForce LACT12-1000B Item Number: 5-1680-12 Price: $310.85
Estimate shipping to:
Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
12 VDC 1000 LB. LINEAR ACTUATOR Brand new, GLIDEFORCE model LACT12-1000B heavy duty linear actuator. Ball screw drive with built-in overload clutch. Metal housing is water resistant and sealed against dust. Permanent magnet motor. No limit switches or potentiometer.
SPECIFICATIONS
Stroke 288 mm (11.34")
Voltage 12 DC
Push/Pull Rating Dynamic 1000 lbs. max
Extension Speed No Load 0.66 in/sec Max Load 0.56 in/sec
Can you turn the mount hole on the motor and 90 degrees?
A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.
Date Submitted: 08/14/2018
Do these actuators have factory set limits?
A: They do not have limit switches, only the racheting overload clutch.
Date Submitted: 03/01/2018
Can the lower mounting bolt be removed so that the actuator can sit flat and flush against the floor?
A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.
Date Submitted: 07/06/2017
Wanted to know if you had a linear lift that would fit my Kubota 900. Wouldn't be lifting more than 600lbs.
A: This should be heavy enough. There is no specific application for this actuator. Measure what the retracted and extended lengths (center to center on the pins) that your application requires.
Date Submitted: 12/15/2015
I have a lawn tractor that I would like to use a linear actuator to angle a 42" snow blade left or right with. Do you have a linear actuator to do something like this or is this not possible?
A: This actuator is rated to push up to 1000 lbs.
However it might not be able to hold it when pushing. A hydraulic system might be better.
Date Submitted: 04/30/2015
do you have an inverter for that actuator 110ac to 12dc?
A: Sorry we don't have any power supplies with sufficient output for these actuators.