4.02" Stroke 500 lbs 12 Volt DC Linear Actuator

Item Number: 5-1679-4

Price: $224.15
TOP
Back to top

4.02" Stroke 500 lbs 12 Volt DC Linear Actuator

4.02" Stroke 500 lbs 12 Volt DC Linear Actuator

item number: 5-1679-4 PRICE: $224.15 42 In Stock Regular Stock Item


calculate shipping
Calculate Shipping for Item 5-1679-4
4.02" Stroke 500 lbs 12 Volt DC Linear Actuator
Item Number: 5-1679-4
Price: $224.15
Estimate shipping to:
Shipping Notes:
* UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
  • This item is on page 162 of our current catalog
Description
12 VDC 500 LB. LINEAR ACTUATOR
Brand new, GLIDEFORCE model LACT4-500A heavy duty linear actuator. ACME screw drive with built-in overload clutch. Metal housing is water resistant and sealed against dust. Permanent magnet motor. No limit switches or potentiometer.

SPECIFICATIONS
  • Stroke 102 mm (4.02")
  • Voltage 12 DC
  • Push/Pull Rating
      Dynamic 500 lbs. max
  • Extension Speed
      No Load 0.66 in/sec
      Max Load 0.56 in/sec
  • Amps
      No Load 2.4
      Full Load 13.2
  • Gear Ratio 20:1
  • Duty 25%
  • Operational Temperature Range
       -13° F to +149° F
  • Enclosure IP65
  • Pin Holes 1/2"
  • Retracted Length 10.24"
  • Shaft Dia. 1-1/8"
  • Size 11.24" x 3.04" x 5.97"
  • Shpg. 9 lbs.
  • More Specs
    Click on boxes below for more information about this product.
    Wiring DiagramMore SpecsAdditional InformationMore Specs
    Ask A Question
    Submit a question for this product

    Showing Questions of 9

    What is the diameter of the tube that the rod goes in? I could not find it on the drawings. I scaled it and it looks to be about 2 inches but i need it to be exact.

    A: The o.d. of the screw housing of the unit tested measures 2.004" at it's widest.

    What is the longest length of 10awg wire I can effectively use for this motor? I have about 5ft. one way from the battery to the motor.

    A: We cannot definitively say.

    Can the actuator rod, (hole), be turned and used at 90 degrees to the base hole end?

    A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.

    what type connector is on this. What is gear ratio

    A: There is no connector. The motor leads are free and tinned. The gear ratio is 20:1.

    is it possible to regulate/control the motor revolution/min. I need a linear travel from 0,25 to 1,6 mm/s

    A: We have no controller to regulate the motor speed and fine tune the travel.

    Hi. I have a damaged actuator. Can I get parts?

    A: Sorry we do not carry parts for this item.

    I need to build a PID Controller with this linear actuator and a load of 300 LB... Is it posible? is there any controller you could recomend me? thanks...

    A: We do not have any controllers that would work for this. Sorry no recommendation on where to acquire one.

    I need a 500 pound dynamic load 4 inch stroke 12 volt DC linear actuator that will hold the load when the voltage is removed. I prefer a steell rod and housing and no belt in the drive. can you help?

    A: This item meets the requirements you mentioned. There is not a brake to hold the load but the geartrain will keep it from moving in most applications.

    the actuator with 500 pound rating ,does it lift and push with the same force?$180.00

    A: Yes it is rated 500 lbs each direction.

    Recently Viewed
    Email a Friend
    4.02" Stroke 500 lbs 12 Volt DC Linear Actuator
    Item Number: 5-1679-4
    Price: $224.15
    Message for your friend:

    I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page:

    4.02" Stroke 500 lbs 12 Volt DC Linear Actuator
    Additional Comments:

    Please wait...
    Newsletter SignUp