5.31" Stroke 1000 lbs 12 Volt DC Linear Actuator GlideForce LACT6-1000B Item Number: 5-1680-6 Price: $300.65
Estimate shipping to:
Shipping Notes: * UPS 3-Day, 2-Day, and Next Day orders entered before 1pm (CST) Mon-Fri will be shipped the same day. Orders entered Sat or Sun will be shipped the following Monday.
12 VDC 1000 LB. LINEAR ACTUATOR Brand new, GLIDEFORCE model LACT6-1000B heavy duty linear actuator. Ball screw drive with built-in overload clutch. Metal housing is water resistant and sealed against dust. Permanent magnet motor. No limit switches or potentiometer.
SPECIFICATIONS
Stroke 135 mm (5.31")
Voltage 12 DC
Push/Pull Rating Dynamic 1000 lbs. max
Extension Speed No Load 0.66 in/sec Max Load 0.56 in/sec
I am using this for a special project, if it does not fit, can the item be returned if not damaged if it does not work for the purpose needed?
A: If you receive a product from us and are not satisfied or the item is not suitable for your application, you can return it within 30 Days, as long as the item has not been installed or modified and it is in the original manufacturers condition.
Date Submitted: 07/31/2018
Can the anchor mounting eye be rotated 90 degrees?
A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.
Date Submitted: 12/18/2017
What is the warranty on this product?
A: These actuators have a one-year manufacturer warranty.
Date Submitted: 11/03/2017
Could this be used as a top link on a 3-point hitch on a small garden tractor John Deere x475
A: We have had no feedback about any success or failure in that attempted application.
Date Submitted: 10/07/2017
Could you please tell me if this actuator 5.31" Stroke 1000 lbs 12 Volt DC Linear Actuator Item Number: 5-1680-6 would be compatible with a john deere 4x2 gator. Thank you. Paul
A: We cannot definitively state so; but other customers have been able to make it work in that, and similar applications. The extent of any modifications necessary is unknown.
Date Submitted: 10/01/2017
Will this actuator work on a sleeve hitch for a garden tractor?
A: It appears similar to what is used on those, but we have no information to confirm the force and stroke used in that application.
Date Submitted: 03/20/2017
How would I set up two of these on a single switch? If wired together to a single switch. How well do they stay timed out synchronized with each other?
A: It would be as simple as connecting the second actuator at the same point as the first. Attention should be paid to the current that the switch will have to handle. We have not tested them in that configuration, so cannot say if they stay synchronized or not.
Date Submitted: 02/25/2017
Is there a way to limit the stroke like a conventional hydraulic cylinder?
A: The stroke can be controlled by external limit switches that would have to be attached to the equipment. There is no physical way to limit the stroke without causing damage to the clutch or the motor.
Date Submitted: 02/23/2017
can you rotate the pin hole on the motor end
A: No. The manufacturer states that any action which would require opening the case and not performed by the manufacturer will void the warranty.
Date Submitted: 12/17/2015
Is there a power supply for this?
A: Sorry we do not carry a suitable power supply for this.